BMXDAI0814 application questions for the Modicon X80 isolated digital input module
BMXDAI0814 is the complete Schneider Electric ordering designation for the Modicon X80 isolated digital input module. The category main image is a shared reference collage, not an exact photograph of BMXDAI0814. The points below separate manufacturer-supported specifications from site-specific choices.
Technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete model | BMXDAI0814 |
| Product identity | Modicon X80 isolated digital input module |
| Inputs | 8 isolated channels |
| Signal voltage | 100–120 V AC |
| Rack | Modicon X80 |
What does BMXDAI0814 identify?
The BMXDAI0814 code identifies the product type and variant described in the table. Keep every character of BMXDAI0814 in purchasing and maintenance records. A partial code or similar photograph cannot establish an exact replacement.
Which application checks matter for BMXDAI0814?
Confirm the AC input supply and terminal mapping; do not substitute a 24 V DC input card.
Before releasing BMXDAI0814, compare the installed supply, load, enclosure, terminals, network or mechanical interface as applicable. Match the actual BMXDAI0814 nameplate and panel drawing to the current manufacturer data. Include any required accessory as a separate line item.
How should BMXDAI0814 be installed and tested?
Qualified personnel should isolate the equipment under site procedure, record the original wiring and configuration, then fit BMXDAI0814 according to the relevant instructions. Preserve any software backup or settings associated with BMXDAI0814.
After installation, test the intended operating sequence and record measured values, indications, alarms and the delivered BMXDAI0814 reference. For a protection or safety component, BMXDAI0814 must be validated within the complete application; the part code alone does not prove compliance.
Related-looking codes grouped with this representative
These 33 unassigned codes share the visible BMXD pattern with BMXDAI0814. They are included on this representative page and are not queued as separate product pages. Their technical specifications may differ from BMXDAI0814; check the full code before substitution.
Final procurement note
Confirm the availability and regional lifecycle of BMXDAI0814, the current datasheet revision and the delivered label. Keep the BMXDAI0814 selection decision with the installation record so a later service team can reconstruct why this exact item was ordered.
