Working with 490NTW00002U ConneXium Ethernet cord in an installed system
This page records the full designation 490NTW00002U for procurement and maintenance. The category main image is reused as a reference illustration and may not depict the exact 490NTW00002U unit. Use the technical items below with the current manufacturer documentation and the actual site design.
Technical data at a glance
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 490NTW00002U |
| Product identity | ConneXium Ethernet cord |
| Cable | Shielded twisted-pair straight cord |
| Length | 2 m |
| Ends | Two RJ45 connectors |
| Approval listing | UL/CSA |
4. Receive and inspect
When 490NTW00002U arrives, compare the nameplate or package label to the approved order. Photograph the marking, inspect physical condition and account for supplied parts. Do not place an item marked differently from 490NTW00002U into service without an approved substitution record.
5. Install and verify
Follow the safe-isolation and installation instructions applicable to 490NTW00002U. Verify wiring, mounting, configuration and protective settings against the project design. Record the functional or commissioning test and the final installed 490NTW00002U identifier.
1. Define the installed duty
Before selecting 490NTW00002U, identify the equipment tag, supply, load and operating conditions. The intended role is ConneXium Ethernet cord. Confirm route length and connector sealing needs. Record any environmental or safety requirement that will affect the final specification of 490NTW00002U.
2. Check the technical interface
Compare 490NTW00002U against the host equipment, mounting dimensions, terminals and necessary accessories. Check electrical ratings and interface protocols where they apply. A similar-looking code can change a critical attribute, so the full 490NTW00002U designation must remain on the review sheet.
3. Request and assess a quotation
Ask the supplier to quote 490NTW00002U exactly, with quantity, destination and current manufacturer documents. Confirm whether the offer includes every needed accessory. If 490NTW00002U is unavailable, demand a written replacement proposal and review every affected parameter before approving it.
Why the complete code matters
The confirmed details in the table are deliberately limited to information supported by manufacturer material for 490NTW00002U. Additional values may depend on a suffix, revision, regional approval or mating component. Before ordering or energising 490NTW00002U, verify any unsupplied value in the current exact-product document.
Keep 490NTW00002U visible in the bill of materials, quotation and maintenance log. This reduces the chance that a near-looking part is selected by appearance alone. The shared image on this page does not establish the physical identity or ratings of 490NTW00002U.
Similar-looking designations indexed here
There is no additional unassigned 490NTW-pattern designation grouped with 490NTW00002U in this catalogue. Any proposed alternate remains subject to its own technical review.
Close-out record
After acceptance, retain the final 490NTW00002U designation, the approved data sheet, supplier details and commissioning result. If the installed part differs from 490NTW00002U, document the engineering approval and update the maintenance record.
