Danfoss MBS1250 063G1542: article 063G1542 for pressure-measurement service
Danfoss MBS1250 063G1542 identifies a MBS 1250 pressure transmitter. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss MBS1250 063G1542 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | MBS1250 063G1542 |
| Manufacturer / item class | Danfoss MBS 1250 pressure transmitter |
| Manufacturer article | 063G1542 |
| Official type key | MBS 1250-3411-C1FA21 |
| Pressure range | 0–250 bar gauge |
| Electrical interface | M12 × 1; verify wiring and output on exact item |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Hydraulic interface
For Danfoss MBS1250 063G1542, check M14 × 1.5 connection and pressure duty against the installed port.
Signal mapping
For Danfoss MBS1250 063G1542, confirm the exact output and supply from Danfoss’s item record before wiring the controller.
Commissioning
For Danfoss MBS1250 063G1542, compare the transmitter reading with a calibrated reference and verify alarm thresholds.
Similar-looking Danfoss order references
These order strings resemble Danfoss MBS1250 063G1542 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss MBS1250 063G1542; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss MBS1250 063G1542 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss MBS1250 063G1542 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss MBS1250 063G1542 identity.
