Danfoss 063G1404 MBS 1250 sensing unit: range, output and interface
Danfoss 063G1404 identifies a MBS 1250 pressure transmitter. The verified manufacturer details below apply to this order number; other codes that look similar may be different parts. The common category image is a reference collage, not a photograph of the exact Danfoss 063G1404 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 063G1404 |
| Manufacturer / item class | Danfoss MBS 1250 pressure transmitter |
| Measuring range | 0–25 bar gauge (relative) |
| Output type | Current output; verify loop scaling on installed equipment |
| Pressure connection | G 1/4 |
| Electrical connector | Deutsch connector |
| Image scope | Shared Danfoss category collage, not an exact-model photograph |
| Final selection rule | Match complete installed label and manufacturer record before substitution |
Range and reference
For Danfoss 063G1404, the 0–25 bar gauge range must match the controller scale and the pressure duty. Do not select a nearby MBS code solely from the mechanical outline.
Loop integration
For Danfoss 063G1404, confirm the supply, current-input channel, pin assignment and fault treatment from the exact installed drawing. Check the Deutsch mating connector before ordering.
Mechanical acceptance
For Danfoss 063G1404, assess port sealing, vibration and cable routing. Compare a measured reference pressure with the controller reading after installation and record the result.
Similar-looking Danfoss order references
The following codes resemble Danfoss 063G1404 in the supplied order-number set. They are search and enquiry references only, not interchangeability approvals. Verify every code's own function, ratings, interfaces and availability before ordering.
Quotation and receiving checklist
When requesting Danfoss 063G1404, provide the full printed order number, the installed equipment identity and the operating duty. Compare the supplier's quotation to the exact Danfoss 063G1404 record, including package quantity and any accessory boundary. A visually matching item with another suffix needs a separate engineering decision.
On receipt of Danfoss 063G1404, check the label, connector or mechanical interfaces, packaging and condition. Document the approved settings or test result after installation so the maintenance record continues to identify Danfoss 063G1404 unambiguously.
