Danfoss 084Z2012 MBT 3270 temperature probe for sensing replacement
Danfoss 084Z2012 identifies a MBT 3270 Pt1000 temperature sensor. The verified manufacturer details below apply to this order number; other codes that look similar may be different parts. The common category image is a reference collage, not a photograph of the exact Danfoss 084Z2012 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 084Z2012 |
| Manufacturer / item class | Danfoss MBT 3270 Pt1000 temperature sensor |
| Sensor element | Pt1000 |
| Published temperature range | -50 to +150 °C |
| Insertion / process fitting | 28 mm insertion; G 1/4 thread |
| Electrical interface | Two-pin AMP Junior Power Timer |
| Image scope | Shared Danfoss category collage, not an exact-model photograph |
| Final selection rule | Match complete installed label and manufacturer record before substitution |
Input scaling
For Danfoss 084Z2012, confirm that the controller is configured for a Pt1000 resistance element. A nearby MBT part with another element type will not preserve the same measured-temperature scale.
Mechanical installation
For Danfoss 084Z2012, compare insertion depth, brass protection tube, G 1/4 connection and cable clearance with the installed assembly. Assess the actual fluid and sealing method.
Verification after fitting
For Danfoss 084Z2012, check the temperature reading against a reference near the relevant operating point, inspect connector sealing and record the final input-channel setup.
Similar-looking Danfoss order references
The following codes resemble Danfoss 084Z2012 in the supplied order-number set. They are search and enquiry references only, not interchangeability approvals. Verify every code's own function, ratings, interfaces and availability before ordering.
Quotation and receiving checklist
When requesting Danfoss 084Z2012, provide the full printed order number, the installed equipment identity and the operating duty. Compare the supplier's quotation to the exact Danfoss 084Z2012 record, including package quantity and any accessory boundary. A visually matching item with another suffix needs a separate engineering decision.
On receipt of Danfoss 084Z2012, check the label, connector or mechanical interfaces, packaging and condition. Document the approved settings or test result after installation so the maintenance record continues to identify Danfoss 084Z2012 unambiguously.
