Danfoss 032L1209 EVR 6 valve body: refrigeration-line fit and ordering checks
Danfoss 032L1209 identifies a EVR 6 refrigeration solenoid valve. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 032L1209 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 032L1209 |
| Manufacturer / item class | Danfoss EVR 6 refrigeration solenoid valve |
| Valve function | Normally closed EVR 6 |
| Inlet / outlet | 1/2 in solder ODF |
| Body | Brass |
| Maximum working pressure | 45.2 bar; coil is not included |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Valve versus coil
For Danfoss 032L1209, the manufacturer lists no coil with this valve-body reference; identify the required compatible coil separately.
Mechanical fit
For Danfoss 032L1209, confirm both ODF tube sizes, flow direction, pressure duty and brazing procedure before installation.
System acceptance
For Danfoss 032L1209, after assembly, check joint integrity and commanded opening and closing under the approved refrigeration procedure.
Similar-looking Danfoss order references
These order strings resemble Danfoss 032L1209 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 032L1209; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 032L1209 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 032L1209 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 032L1209 identity.
