What to confirm for the PC S02 charging lead
Pepperl+Fuchs PC S02 identifies the PC S02 USB charging cable. The main image is a shared Pepperl+Fuchs montage, not a photograph of this exact PC S02 item. For an order or maintenance plan, carry both PC S02 and the complete type PC S02 to the nameplate and current manufacturer record. The early table separates confirmed reference facts from choices that must be checked on site.
Technical data and selection boundary
| Technical item | Verified value / selection note |
|---|---|
| Exact model | PC S02 |
| Product role | USB charging cable |
| Compatible series | Smart-Ex 02; Ex-Handy 10 |
| Connectors | Magnetic pogo connector to USB Type A 2.0 |
| Length | Approximately 1.2 m |
| Approval boundary | Non-hazardous area only |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
System role and identity
The purpose of PC S02 is to connect a Smart-Ex 02 or Ex-Handy 10 charging interface to a suitable USB-A supply. Start with the installed system: record the host equipment, supply, mating connection and the environmental or hazardous-area limits. A similar product can fit visually while failing electrically or mechanically. Treat PC S02 as an exact order reference, not permission to substitute a nearby catalogue code.
Site verification checklist
- Photograph the printed PC S02 marking and any companion PC S02 label before removing equipment.
- Match the PC S02 connector or mounting arrangement to the drawing, not to the shared category image.
- Record the as-found circuit state and settings associated with PC S02 for later acceptance testing.
- Check certificates, local procedures and the complete PC S02 order string when Ex requirements apply.
Fit, handling and approval
Before energizing PC S02, The manufacturer rates this cable for non-hazardous-area use; do not charge in a hazardous area. Inspect cable routing, enclosure condition and the connected equipment. For PC S02, reproduce the original configuration only after confirming it is valid for the replacement. If the device is part of an Ex or safety-related installation, have the responsible engineer validate the whole assembly rather than the component name alone.
Commissioning evidence
The PC S02 commissioning record should capture the installed PC S02 identity, normal operation, changed-state response and any alarms. When applicable, confirm the signal at both ends of the circuit, then repeat after final fixing. A successful PC S02 bench check does not replace field approval or hazardous-area inspection.
Procurement record
A purchasing request for PC S02 should show the exact code PC S02, quantity, application, host interface and required documents. Ask the supplier to confirm the complete designation and current availability. Retain the verified specification and the installed label with the PC S02 maintenance file so a later replacement is not inferred from a stock photograph.
Related-code policy
The source model PC S02 is intentionally kept as a standalone search and ordering key here. No unverified look-alike designations are presented as equivalent to PC S02. If a different suffix is offered, compare its own published limits and approval documents before acceptance.
