A practical replacement file for Pepperl+Fuchs LMR18-3.2-2.0-K1
Pepperl+Fuchs LMR18-3.2-2.0-K1 is a glass fiber-optic sensor cable used to carry light between a compatible optical amplifier and the sensing point. This page keeps the exact LMR18-3.2-2.0-K1 designation visible for buyers and maintenance personnel. The shared product main image is a category montage, not an exact photograph of LMR18-3.2-2.0-K1. Confirm the latest manufacturer record and installed label before using any figure to specify a replacement.
Technical data and selection limits
| Technical item | Verified value / selection note |
|---|---|
| Exact model | LMR18-3.2-2.0-K1 |
| Product role | glass fiber-optic sensor cable |
| Manufacturer designation | LMR 18-3,2-2,0-K1 |
| Part class | Diffuse glass fiber optic |
| Construction | Metal covering |
| Handling | Do not twist, kink or over-tension |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Mounting and connection
Before installation of LMR18-3.2-2.0-K1, Confirm fiber routing, sensing geometry and amplifier compatibility. Inspect the exact terminals, mechanical engagement and clearance against the manufacturer's drawing. If the installation is Ex-rated or safety-related, validate the complete certified circuit and site procedure. Do not copy limits from a visually similar suffix onto LMR18-3.2-2.0-K1.
Purpose in the process
The operational role of LMR18-3.2-2.0-K1 is to carry light between a compatible optical amplifier and the sensing point. Document the expected input condition and the required output or mechanical response. A change in host electronics, wiring, hazardous-area classification or process medium can alter whether LMR18-3.2-2.0-K1 remains suitable. Similar-looking designations listed below are inventory references only, not declared substitutes.
Installed assembly
For LMR18-3.2-2.0-K1, start with the real installation rather than the appearance of a similar component. Record the mating device, drawing revision, power supply, connection, mounting position and environmental conditions. The complete LMR18-3.2-2.0-K1 code is the ordering key. Accessories and certificates may be separate line items, so request confirmation of the entire installed assembly.
Order description
An enquiry for LMR18-3.2-2.0-K1 should include the exact printed code, quantity, host or mating accessory, approval need and a label photograph. The technical table identifies confirmed values for LMR18-3.2-2.0-K1; any uncertain variant choice is explicitly a verification item. Request the appropriate document for every alternative suffix and retain the approved selection with the maintenance file.
Functional acceptance
To accept LMR18-3.2-2.0-K1, observe a known normal state and a known changed state at the connected host. Record the measured values, output indication and controller response. Where adjustment or configuration exists, preserve its settings before removing the former unit. Check the working-range edge and repeat the test after final mechanical fixing of LMR18-3.2-2.0-K1.
Other visually related designations
Codes below resemble LMR18-3.2-2.0-K1 in print but may differ in function, ratings, fit or approvals. Verify each full designation independently.
No additional same-pattern designation is grouped with LMR18-3.2-2.0-K1 here.
Service close-out
Handover for LMR18-3.2-2.0-K1 is complete only when the fitted marking, drawing, test result and purchasing record match. Keep the photos and settings so a later team can recognize LMR18-3.2-2.0-K1 without guessing from the shared image or the related-code index.
