Technical fit record for ABB TA80DU-80
ABB TA80DU-80 is indexed here as a specific buying and service reference. Confirm its complete designation before assuming that another family member has the same terminals, electrical duty or approvals.
Verified technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | TA80DU-80 |
| Product family | TA80DU-80 |
| Component role | thermal motor overload relay |
| Family | TA80DU thermal overload |
| Setting | Confirm 60–80 A version on nameplate |
| Function | Motor overload protection |
| ABB order code | 1SAZ331201R1006 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table for ABB TA80DU-80 separates verified family data from the configuration checks that still require a nameplate or ABB order record. Do not use a family rating as an unconditional guarantee for the installed unit.
Site preparation
Plan the TA80DU-80 replacement under the facility isolation and permit rules. Preserve photographs, configuration files, settings and a diagnostic baseline before disturbing wiring.
Check enclosure temperature, grounding, segregation and protection coordination for TA80DU-80. Record any accessory that is supplied separately rather than assuming it is in the device box.
Purchase decision
Specify ABB TA80DU-80 against a particular asset tag and duty. This unit is used to protect a matched motor starter from sustained overload; record the intended circuit, process or equipment location before requesting a quote.
For TA80DU-80, confirm motor full-load current, contactor fit, reset method and ambient. A matching short family name is not sufficient evidence of electrical, mechanical or software interchangeability.
Interface checklist
Before ordering TA80DU-80, compare the installed terminal or connector arrangement, power source, mounting envelope and ancillary hardware with the current drawing.
Document the serial number and revision of TA80DU-80 where available. If a supplier proposes a substitute, obtain engineering acceptance for every changed interface.
Lifecycle handover
Keep ABB TA80DU-80 linked to its exact spares description, drawings and current manual revision. This helps the next maintenance team identify the same configuration rather than a superficially similar item.
Review the first operating period of TA80DU-80 for alarms, heating, drift or switching anomalies and update the asset record if the installed build differs from the original request.
Receipt inspection
On arrival, compare the supplied TA80DU-80 label and order code with the approved purchase description. Inspect packaging, terminals, seals and visible damage.
Do not install TA80DU-80 when the shipped suffix, control voltage, release or approval differs from the approved build; resolve that discrepancy before commissioning.
Commissioning evidence
For TA80DU-80, set the current and verify starter trip indication. Carry out only the tests approved for this device and the connected installation.
Save the as-left settings, measured results, witness and work-order reference for TA80DU-80. Any temporary bypass or inhibited alarm must be removed before normal operation.
Related configuration references
The following TA80DU-80 codes are recorded with ABB TA80DU-80 for enquiry. Suffixes may alter ratings, dimensions, approvals or accessories; these are not automatic replacements.
No additional unassigned TA80DU-80 code is grouped with TA80DU-80 at this stage.
Information to send with an enquiry
Quote ABB TA80DU-80 exactly and include the asset tag, electrical or process duty, required accessories and delivery documentation.
For TA80DU-80, request written confirmation of any deviation from the fitted unit before accepting an alternative.
