ABB T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) procurement and technical dossier
ABB T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) is indexed here as a specific buying and service reference. Confirm its complete designation before assuming that another family member has the same terminals, electrical duty or approvals.
Verified technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) |
| Product family | T8L |
| Component role | Tmax T8L high-current molded-case breaker |
| Frame | T8L 2500 |
| Poles | 3 |
| Release | PR331/P LSI |
| Construction | Fixed, front terminals |
| Order code | 1SDA065758R1 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table for ABB T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) separates verified family data from the configuration checks that still require a nameplate or ABB order record. Do not use a family rating as an unconditional guarantee for the installed unit.
Purchase decision
Specify ABB T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) against a particular asset tag and duty. This unit is used to protect the engineered 2500 A feeder; record the intended circuit, process or equipment location before requesting a quote.
For T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1), confirm LSI study, fault level, conductor temperature and operating gear. A matching short family name is not sufficient evidence of electrical, mechanical or software interchangeability.
Commissioning evidence
For T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1), record approved trip-unit and interlock tests. Carry out only the tests approved for this device and the connected installation.
Save the as-left settings, measured results, witness and work-order reference for T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1). Any temporary bypass or inhibited alarm must be removed before normal operation.
Interface checklist
Before ordering T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1), compare the installed terminal or connector arrangement, power source, mounting envelope and ancillary hardware with the current drawing.
Document the serial number and revision of T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) where available. If a supplier proposes a substitute, obtain engineering acceptance for every changed interface.
Receipt inspection
On arrival, compare the supplied T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) label and order code with the approved purchase description. Inspect packaging, terminals, seals and visible damage.
Do not install T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) when the shipped suffix, control voltage, release or approval differs from the approved build; resolve that discrepancy before commissioning.
Site preparation
Plan the T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) replacement under the facility isolation and permit rules. Preserve photographs, configuration files, settings and a diagnostic baseline before disturbing wiring.
Check enclosure temperature, grounding, segregation and protection coordination for T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1). Record any accessory that is supplied separately rather than assuming it is in the device box.
Lifecycle handover
Keep ABB T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) linked to its exact spares description, drawings and current manual revision. This helps the next maintenance team identify the same configuration rather than a superficially similar item.
Review the first operating period of T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) for alarms, heating, drift or switching anomalies and update the asset record if the installed build differs from the original request.
Related configuration references
The following T8L codes are recorded with ABB T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) for enquiry. Suffixes may alter ratings, dimensions, approvals or accessories; these are not automatic replacements.
No additional unassigned T8L code is grouped with T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) at this stage.
Information to send with an enquiry
Quote ABB T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1) exactly and include the asset tag, electrical or process duty, required accessories and delivery documentation.
For T8L 2500 PR331/P LSI IN = 2500A 3P F F(1SDA065758R1), request written confirmation of any deviation from the fitted unit before accepting an alternative.
