Field checklist for ABB PSTX170-600-70 (1SFA898111R7000)
Start the ABB PSTX170-600-70 (1SFA898111R7000) enquiry with a precise equipment identity and a defined plant function. The verified values below establish a technical baseline; they do not replace checking the delivered unit.
Verified parameters and fit limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | PSTX170-600-70 (1SFA898111R7000) |
| Product family | PSTX170 |
| Component role | 170 A three-phase industrial softstarter |
| Type | PSTX170-600-70 |
| Order code | 1SFA898111R7000 |
| Maximum operational current | 170 A |
| Main voltage | 208–600 V AC |
| Control voltage | 100–250 V AC, 50/60 Hz |
| Function | Soft start/stop with motor protection |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Before signing off PSTX170-600-70 (1SFA898111R7000), check the current ABB documentation and the actual nameplate. Family-level information must not be used as a guaranteed option for every configuration.
Which interfaces must match?
For PSTX170-600-70 (1SFA898111R7000), confirm motor FLA, starter wiring, ramp settings and duty. Compare the original label, mounting, field terminals and power/control supplies with the ABB product reference.
Keep the PSTX170-600-70 (1SFA898111R7000) electrical or network interface unchanged unless engineering has approved the revised drawing, settings and test scope.
What problem does it solve?
ABB PSTX170-600-70 (1SFA898111R7000) is selected to start and stop a matched three-phase motor. State the actual circuit, loop or motor tag and the operating problem before deciding on a replacement.
A request for PSTX170-600-70 (1SFA898111R7000) without site duty, installed revision or failure evidence can lead to a technically different part being offered.
What can cause a poor match?
A PSTX170-600-70 (1SFA898111R7000) suffix or order-code difference may identify another coil, contact set, protocol, release, shaft or voltage. A matching appearance is not interchangeability evidence.
If the supplied PSTX170-600-70 (1SFA898111R7000) differs from the approved item, quarantine it for review rather than changing field wiring to make it fit.
What changes at installation?
Installing PSTX170-600-70 (1SFA898111R7000) may affect adjacent wiring, panel access and auxiliary accessories. Check clearance and isolate the correct energy sources under the site's permit system.
Before disturbing PSTX170-600-70 (1SFA898111R7000), save photos, configuration, parameter values and an alarm baseline. Keep removed parts identifiable until acceptance is signed.
What should purchasing retain?
The ABB PSTX170-600-70 (1SFA898111R7000) record should include the complete designation, required accessories, label evidence and the current installation manual revision.
For any proposed substitute to PSTX170-600-70 (1SFA898111R7000), obtain written confirmation of every changed technical characteristic and the site's acceptance.
How is performance proved?
After approved installation of PSTX170-600-70 (1SFA898111R7000), prove acceleration, current and bypass behavior. Use only documented safe test methods and include connected equipment behavior.
Record the PSTX170-600-70 (1SFA898111R7000) as-left results, asset tag, revision, date and witness. Restore alarms, interlocks and normal control before service handover.
Other codes in this same series
The following PSTX170 references can accompany an ABB PSTX170-600-70 (1SFA898111R7000) enquiry. Suffix changes can affect ratings, fit or approvals, so none is an automatic replacement.
No other unassigned PSTX170 reference is grouped with PSTX170-600-70 (1SFA898111R7000) in this release.
Enquiry and acceptance handoff
Quote ABB PSTX170-600-70 (1SFA898111R7000) exactly, include the asset tag and duty, and request confirmation of any missing accessories or alternative build.
Keep the approved PSTX170-600-70 (1SFA898111R7000) comparison, installation checks and test results in the maintenance record.
