Field verification of PSS142/245-500L 1SFA892010R1002
Use the complete PSS142/245-500L 1SFA892010R1002 designation when tracing a fault or buying a replacement. PSS142/245-500L 1SFA892010R1002 is a PSS motor softstarter and its installed duty matters more than a visually similar housing.
Technical data to check first
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | PSS142/245-500L 1SFA892010R1002 |
| Product family | PSS |
| Component role | PSS motor softstarter |
| Maximum rated current | 142 A in-line |
| Main voltage class | 208-500 V AC |
| Control voltage | 220-240 V AC for L variant |
| Article number | 1SFA892010R1002 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The PSS142/245-500L 1SFA892010R1002 values above identify this selection. Verify the actual nameplate, hardware revision and option set before declaring another code equivalent.
Replacement compatibility review
For PSS142/245-500L 1SFA892010R1002, compare motor full-load current, starting duty, control voltage, contactor arrangement and overload coordination. Check the complete order code, not only the family prefix.
A proposed substitute for PSS142/245-500L 1SFA892010R1002 requires a documented comparison of electrical or process rating, terminals, communications, mechanical fit and any required settings.
Installation handover
Isolate the circuit or process before touching PSS142/245-500L 1SFA892010R1002; follow the site's approved safety procedure. Record cable labels, settings, accessory positions and original markings.
When PSS142/245-500L 1SFA892010R1002 is fitted, restore the approved configuration and make sure installation details match the drawings. Keep removed parts until the acceptance result is signed off.
Acceptance evidence
The practical test for PSS142/245-500L 1SFA892010R1002 is to measure start profile, stop behavior and protection response at the real load. Log the expected result, actual result, date and responsible technician.
Do not close a PSS142/245-500L 1SFA892010R1002 replacement ticket on visual inspection alone. Confirm the normal function and the planned failure or alarm response where safely testable.
Observed fault and process consequence
In this installation, PSS142/245-500L 1SFA892010R1002 is intended to limit motor-start electrical and mechanical stress in the installed starter circuit. Write down the fault indication, operating state and last known good reading before removal.
If PSS142/245-500L 1SFA892010R1002 trips or loses communication intermittently, separate wiring and supply faults from device faults. Capture the relevant alarm history and field measurements.
Other codes in this series
The following PSS designations are placed under PSS142/245-500L 1SFA892010R1002 for enquiries. Ratings, hardware versions and options may differ; these codes are not declared interchangeable.
- PSS175/300-500F 1SFA892011R1001
- PSS60/105-500L,1SFA892006R1002
Records to keep
File the PSS142/245-500L 1SFA892010R1002 order identification, inspection result, settings backup and commissioning evidence with the equipment record.
If PSS142/245-500L 1SFA892010R1002 is later reordered, compare the current installation record with the supplier's complete designation before the purchase is released.
