Where EI813F (3BDH000022R1) fits in the installed system
Use the complete EI813F (3BDH000022R1) designation when tracing a fault or buying a replacement. EI813F (3BDH000022R1) is a Freelance 10BaseT Ethernet interface and its installed duty matters more than a visually similar housing.
Technical data to check first
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | EI813F (3BDH000022R1) |
| Product family | EI813F |
| Component role | Freelance 10BaseT Ethernet interface |
| Network | IEEE 802.3 10BaseT |
| Rate | 10 Mbit/s |
| Host | PM803F controller |
| Article number | 3BDH000022R1 |
| Battery | Ordered separately |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The EI813F (3BDH000022R1) values above identify this selection. Verify the actual nameplate, hardware revision and option set before declaring another code equivalent.
Observed fault and process consequence
In this installation, EI813F (3BDH000022R1) is intended to connect a compatible Freelance controller to its control network. Write down the fault indication, operating state and last known good reading before removal.
If EI813F (3BDH000022R1) trips or loses communication intermittently, separate wiring and supply faults from device faults. Capture the relevant alarm history and field measurements.
Replacement compatibility review
For EI813F (3BDH000022R1), compare PM803F compatibility, network wiring, software revision, battery arrangement and controller backup. Check the complete order code, not only the family prefix.
A proposed substitute for EI813F (3BDH000022R1) requires a documented comparison of electrical or process rating, terminals, communications, mechanical fit and any required settings.
Installation handover
Isolate the circuit or process before touching EI813F (3BDH000022R1); follow the site's approved safety procedure. Record cable labels, settings, accessory positions and original markings.
When EI813F (3BDH000022R1) is fitted, restore the approved configuration and make sure installation details match the drawings. Keep removed parts until the acceptance result is signed off.
Acceptance evidence
The practical test for EI813F (3BDH000022R1) is to confirm link state, controller access and restored application communication. Log the expected result, actual result, date and responsible technician.
Do not close a EI813F (3BDH000022R1) replacement ticket on visual inspection alone. Confirm the normal function and the planned failure or alarm response where safely testable.
Other codes in this series
The following EI813F designations are placed under EI813F (3BDH000022R1) for enquiries. Ratings, hardware versions and options may differ; these codes are not declared interchangeable.
- AC800F (PM802F+SA811F+FI830F+EI813F)
Records to keep
File the EI813F (3BDH000022R1) order identification, inspection result, settings backup and commissioning evidence with the equipment record.
If EI813F (3BDH000022R1) is later reordered, compare the current installation record with the supplier's complete designation before the purchase is released.
