ABB KP6-40G(1SFA616105R4002) selection decision record
Start the ABB KP6-40G(1SFA616105R4002) enquiry with a precise equipment identity and a defined plant function. The verified values below establish a technical baseline; they do not replace checking the delivered unit.
Verified parameters and fit limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | KP6-40G(1SFA616105R4002) |
| Product family | KP6 |
| Component role | green heavy-duty momentary pushbutton operator |
| Type | KP6-40G |
| Order code | 1SFA616105R4002 |
| Color | Green |
| Action | Momentary |
| Illumination | Non-illuminated |
| Contact blocks | Select required blocks separately |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Before signing off KP6-40G(1SFA616105R4002), check the current ABB documentation and the actual nameplate. Family-level information must not be used as a guaranteed option for every configuration.
Which interfaces must match?
For KP6-40G(1SFA616105R4002), confirm panel size, contact blocks, legend and environmental sealing. Compare the original label, mounting, field terminals and power/control supplies with the ABB product reference.
Keep the KP6-40G(1SFA616105R4002) electrical or network interface unchanged unless engineering has approved the revised drawing, settings and test scope.
What changes at installation?
Installing KP6-40G(1SFA616105R4002) may affect adjacent wiring, panel access and auxiliary accessories. Check clearance and isolate the correct energy sources under the site's permit system.
Before disturbing KP6-40G(1SFA616105R4002), save photos, configuration, parameter values and an alarm baseline. Keep removed parts identifiable until acceptance is signed.
What problem does it solve?
ABB KP6-40G(1SFA616105R4002) is selected to provide the assigned operator input. State the actual circuit, loop or motor tag and the operating problem before deciding on a replacement.
A request for KP6-40G(1SFA616105R4002) without site duty, installed revision or failure evidence can lead to a technically different part being offered.
How is performance proved?
After approved installation of KP6-40G(1SFA616105R4002), check spring return and wired contact action. Use only documented safe test methods and include connected equipment behavior.
Record the KP6-40G(1SFA616105R4002) as-left results, asset tag, revision, date and witness. Restore alarms, interlocks and normal control before service handover.
What can cause a poor match?
A KP6-40G(1SFA616105R4002) suffix or order-code difference may identify another coil, contact set, protocol, release, shaft or voltage. A matching appearance is not interchangeability evidence.
If the supplied KP6-40G(1SFA616105R4002) differs from the approved item, quarantine it for review rather than changing field wiring to make it fit.
What should purchasing retain?
The ABB KP6-40G(1SFA616105R4002) record should include the complete designation, required accessories, label evidence and the current installation manual revision.
For any proposed substitute to KP6-40G(1SFA616105R4002), obtain written confirmation of every changed technical characteristic and the site's acceptance.
Other codes in this same series
The following KP6 references can accompany an ABB KP6-40G(1SFA616105R4002) enquiry. Suffix changes can affect ratings, fit or approvals, so none is an automatic replacement.
No other unassigned KP6 reference is grouped with KP6-40G(1SFA616105R4002) in this release.
Enquiry and acceptance handoff
Quote ABB KP6-40G(1SFA616105R4002) exactly, include the asset tag and duty, and request confirmation of any missing accessories or alternative build.
Keep the approved KP6-40G(1SFA616105R4002) comparison, installation checks and test results in the maintenance record.
