ABB DS201 C6 AC30 2CSR255080R1064: field fit and operating duty
ABB DS201 C6 AC30 2CSR255080R1064 should be specified as a complete device, not inferred from a similar family name. Its protection, control or measurement role must match the actual equipment and installation.
Technical data for model selection
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | DS201 C6 AC30 2CSR255080R1064 |
| Product family | DS201 |
| Component role | 1P+N residual-current breaker with overcurrent protection |
| Function | RCBO: overload, short circuit and residual current |
| Poles | 1P+N |
| Current | 6 A designation |
| Residual | AC type, 30 mA designation |
| Order code | 2CSR255080R1064; verify label |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The stated DS201 C6 AC30 2CSR255080R1064 data identify the selected reference and its engineering boundaries. Confirm the unit label, applicable standard and exact options before ordering or energizing.
What must match
Check DS201 C6 AC30 2CSR255080R1064 against residual-current type, sensitivity, circuit load, fault capacity and neutral wiring. In procurement, ask for photographs or ABB documentation that show the complete designation and terminal configuration.
If the candidate DS201 C6 AC30 2CSR255080R1064 differs from the installed device, document the difference and obtain an engineering decision before fitment.
Design intent
The intended duty of DS201 C6 AC30 2CSR255080R1064 is to protect the assigned one-phase circuit and monitor earth leakage. Mark the circuit, asset or process tag and preserve the plant drawing that governs this function.
Do not assume a different suffix within DS201 provides the same duty as DS201 C6 AC30 2CSR255080R1064; ratings and accessory arrangements can differ.
Installation controls
Before working on DS201 C6 AC30 2CSR255080R1064, apply the approved isolation and permit controls. Capture the existing connections, settings and safety functions as a recoverable baseline.
Install DS201 C6 AC30 2CSR255080R1064 with the correct conductor, panel spacing and environmental protection. Follow the ABB instructions for the specific construction rather than using a generic wiring assumption.
Handover evidence
For DS201 C6 AC30 2CSR255080R1064, perform the prescribed test-button and instrument checks. Record the measured result, witness and date beside the equipment tag.
Retain the final DS201 C6 AC30 2CSR255080R1064 designation, revision, settings and test outcome in the maintenance record so later work does not rely on memory.
Fault-finding baseline
For a future fault involving DS201 C6 AC30 2CSR255080R1064, keep records of upstream supply, load, trip or output state and connected accessories. This separates a device issue from a wiring or process issue.
A replacement DS201 C6 AC30 2CSR255080R1064 should be checked at the same duty point as the prior installation, with abnormal behavior investigated before return to service.
Related model references
The following DS201 codes are indexed with ABB DS201 C6 AC30 2CSR255080R1064 for search and enquiry. They remain configuration-specific; this grouping does not assert electrical, mechanical or approval interchangeability.
- 2CSR255180R1104, DS201 C10 A30
- DS201 B32 AC30
- DS201 C32 AC30
- DS201AC-C10/30
- DS201AC-C16/30
Enquiry checklist
Send the exact ABB DS201 C6 AC30 2CSR255080R1064 designation with circuit or plant tag, required rating, accessories and approval. Confirm current lifecycle and delivery scope.
On receipt of DS201 C6 AC30 2CSR255080R1064, compare label, package contents and documentation to the approved request. Hold any discrepancy for review before fitting.
