Technical service profile for ABB AF12-30-10-13
ABB AF12-30-10-13 should be specified as a complete device, not inferred from a similar family name. Its protection, control or measurement role must match the actual equipment and installation.
Technical data for model selection
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | AF12-30-10-13 |
| Product family | AF12 |
| Component role | three-pole AF12 contactor |
| Main contacts | 3 normally open |
| Auxiliary | 1 normally open |
| Coil | 100–250 V AC/DC |
| AC-3 current | 12 A at 380/400 V reference |
| Order code | 1SBL157001R1310 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The stated AF12-30-10-13 data identify the selected reference and its engineering boundaries. Confirm the unit label, applicable standard and exact options before ordering or energizing.
Design intent
The intended duty of AF12-30-10-13 is to switch the specified small three-phase motor or feeder. Mark the circuit, asset or process tag and preserve the plant drawing that governs this function.
Do not assume a different suffix within AF12 provides the same duty as AF12-30-10-13; ratings and accessory arrangements can differ.
Fault-finding baseline
For a future fault involving AF12-30-10-13, keep records of upstream supply, load, trip or output state and connected accessories. This separates a device issue from a wiring or process issue.
A replacement AF12-30-10-13 should be checked at the same duty point as the prior installation, with abnormal behavior investigated before return to service.
What must match
Check AF12-30-10-13 against motor AC-3 current, coil supply, auxiliary logic and overload protection. In procurement, ask for photographs or ABB documentation that show the complete designation and terminal configuration.
If the candidate AF12-30-10-13 differs from the installed device, document the difference and obtain an engineering decision before fitment.
Handover evidence
For AF12-30-10-13, test pickup, dropout, all poles and auxiliary response. Record the measured result, witness and date beside the equipment tag.
Retain the final AF12-30-10-13 designation, revision, settings and test outcome in the maintenance record so later work does not rely on memory.
Installation controls
Before working on AF12-30-10-13, apply the approved isolation and permit controls. Capture the existing connections, settings and safety functions as a recoverable baseline.
Install AF12-30-10-13 with the correct conductor, panel spacing and environmental protection. Follow the ABB instructions for the specific construction rather than using a generic wiring assumption.
Related model references
The following AF12 codes are indexed with ABB AF12-30-10-13 for search and enquiry. They remain configuration-specific; this grouping does not assert electrical, mechanical or approval interchangeability.
- 1SBL157001R1310 AF12-30-10-13
- AF12 -30-10-13
- AF12-30-01-11
- AF12-30-01-13
- AF12-30-10-12 48-130V50/60HZ-DC
- AF12-30-10-13 100-250VAC
Enquiry checklist
Send the exact ABB AF12-30-10-13 designation with circuit or plant tag, required rating, accessories and approval. Confirm current lifecycle and delivery scope.
On receipt of AF12-30-10-13, compare label, package contents and documentation to the approved request. Hold any discrepancy for review before fitting.
