Technical fit record for ABB DCS800-S01-0900-05+L508+S174 (3ADT218435R001)
ABB DCS800-S01-0900-05+L508+S174 (3ADT218435R001) is indexed here as a specific buying and service reference. Confirm its complete designation before assuming that another family member has the same terminals, electrical duty or approvals.
Verified technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | DCS800-S01-0900-05+L508+S174 (3ADT218435R001) |
| Product family | DCS800-S01-0900-05 |
| Component role | DCS800 industrial DC drive configuration |
| Family | DCS800-S01 DC drive |
| Base designation | 0900-05 |
| Options | +L508 and +S174; verify engineered build |
| Order reference | 3ADT218435R001; confirm complete unit record |
| Ratings | Do not infer from suffix without full nameplate |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table for ABB DCS800-S01-0900-05+L508+S174 (3ADT218435R001) separates verified family data from the configuration checks that still require a nameplate or ABB order record. Do not use a family rating as an unconditional guarantee for the installed unit.
Interface checklist
Before ordering DCS800-S01-0900-05+L508+S174 (3ADT218435R001), compare the installed terminal or connector arrangement, power source, mounting envelope and ancillary hardware with the current drawing.
Document the serial number and revision of DCS800-S01-0900-05+L508+S174 (3ADT218435R001) where available. If a supplier proposes a substitute, obtain engineering acceptance for every changed interface.
Purchase decision
Specify ABB DCS800-S01-0900-05+L508+S174 (3ADT218435R001) against a particular asset tag and duty. This unit is used to regulate the engineered DC motor system; record the intended circuit, process or equipment location before requesting a quote.
For DCS800-S01-0900-05+L508+S174 (3ADT218435R001), confirm armature and field ratings, option cards, mains, cooling and motor parameters. A matching short family name is not sufficient evidence of electrical, mechanical or software interchangeability.
Receipt inspection
On arrival, compare the supplied DCS800-S01-0900-05+L508+S174 (3ADT218435R001) label and order code with the approved purchase description. Inspect packaging, terminals, seals and visible damage.
Do not install DCS800-S01-0900-05+L508+S174 (3ADT218435R001) when the shipped suffix, control voltage, release or approval differs from the approved build; resolve that discrepancy before commissioning.
Site preparation
Plan the DCS800-S01-0900-05+L508+S174 (3ADT218435R001) replacement under the facility isolation and permit rules. Preserve photographs, configuration files, settings and a diagnostic baseline before disturbing wiring.
Check enclosure temperature, grounding, segregation and protection coordination for DCS800-S01-0900-05+L508+S174 (3ADT218435R001). Record any accessory that is supplied separately rather than assuming it is in the device box.
Lifecycle handover
Keep ABB DCS800-S01-0900-05+L508+S174 (3ADT218435R001) linked to its exact spares description, drawings and current manual revision. This helps the next maintenance team identify the same configuration rather than a superficially similar item.
Review the first operating period of DCS800-S01-0900-05+L508+S174 (3ADT218435R001) for alarms, heating, drift or switching anomalies and update the asset record if the installed build differs from the original request.
Commissioning evidence
For DCS800-S01-0900-05+L508+S174 (3ADT218435R001), check speed, field supervision, current and protective trips. Carry out only the tests approved for this device and the connected installation.
Save the as-left settings, measured results, witness and work-order reference for DCS800-S01-0900-05+L508+S174 (3ADT218435R001). Any temporary bypass or inhibited alarm must be removed before normal operation.
Related configuration references
The following DCS800-S01-0900-05 codes are recorded with ABB DCS800-S01-0900-05+L508+S174 (3ADT218435R001) for enquiry. Suffixes may alter ratings, dimensions, approvals or accessories; these are not automatic replacements.
- DCS800-S01-0900-05+L508+S174 CH
Information to send with an enquiry
Quote ABB DCS800-S01-0900-05+L508+S174 (3ADT218435R001) exactly and include the asset tag, electrical or process duty, required accessories and delivery documentation.
For DCS800-S01-0900-05+L508+S174 (3ADT218435R001), request written confirmation of any deviation from the fitted unit before accepting an alternative.
