ABB CA4-22M 1SBN010140R1122 procurement and technical dossier
ABB CA4-22M 1SBN010140R1122 is indexed here as a specific buying and service reference. Confirm its complete designation before assuming that another family member has the same terminals, electrical duty or approvals.
Verified technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | CA4-22M 1SBN010140R1122 |
| Product family | CA4-22M |
| Component role | front-mounted auxiliary contact block |
| Contacts | 2 NO + 2 NC |
| Mount | Front of compatible contactor |
| Role | Auxiliary/control circuit switching |
| Order code | 1SBN010140R1122 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table for ABB CA4-22M 1SBN010140R1122 separates verified family data from the configuration checks that still require a nameplate or ABB order record. Do not use a family rating as an unconditional guarantee for the installed unit.
Purchase decision
Specify ABB CA4-22M 1SBN010140R1122 against a particular asset tag and duty. This unit is used to extend the contactor control feedback; record the intended circuit, process or equipment location before requesting a quote.
For CA4-22M 1SBN010140R1122, confirm contactor generation, mechanical fit, terminal marking and circuit load. A matching short family name is not sufficient evidence of electrical, mechanical or software interchangeability.
Interface checklist
Before ordering CA4-22M 1SBN010140R1122, compare the installed terminal or connector arrangement, power source, mounting envelope and ancillary hardware with the current drawing.
Document the serial number and revision of CA4-22M 1SBN010140R1122 where available. If a supplier proposes a substitute, obtain engineering acceptance for every changed interface.
Site preparation
Plan the CA4-22M 1SBN010140R1122 replacement under the facility isolation and permit rules. Preserve photographs, configuration files, settings and a diagnostic baseline before disturbing wiring.
Check enclosure temperature, grounding, segregation and protection coordination for CA4-22M 1SBN010140R1122. Record any accessory that is supplied separately rather than assuming it is in the device box.
Receipt inspection
On arrival, compare the supplied CA4-22M 1SBN010140R1122 label and order code with the approved purchase description. Inspect packaging, terminals, seals and visible damage.
Do not install CA4-22M 1SBN010140R1122 when the shipped suffix, control voltage, release or approval differs from the approved build; resolve that discrepancy before commissioning.
Commissioning evidence
For CA4-22M 1SBN010140R1122, test all four auxiliary states against the main contactor. Carry out only the tests approved for this device and the connected installation.
Save the as-left settings, measured results, witness and work-order reference for CA4-22M 1SBN010140R1122. Any temporary bypass or inhibited alarm must be removed before normal operation.
Lifecycle handover
Keep ABB CA4-22M 1SBN010140R1122 linked to its exact spares description, drawings and current manual revision. This helps the next maintenance team identify the same configuration rather than a superficially similar item.
Review the first operating period of CA4-22M 1SBN010140R1122 for alarms, heating, drift or switching anomalies and update the asset record if the installed build differs from the original request.
Related configuration references
The following CA4-22M codes are recorded with ABB CA4-22M 1SBN010140R1122 for enquiry. Suffixes may alter ratings, dimensions, approvals or accessories; these are not automatic replacements.
- 1SBN010140R1122, CA4-22M
Information to send with an enquiry
Quote ABB CA4-22M 1SBN010140R1122 exactly and include the asset tag, electrical or process duty, required accessories and delivery documentation.
For CA4-22M 1SBN010140R1122, request written confirmation of any deviation from the fitted unit before accepting an alternative.
