ABB 3AUA0000107392 installation and procurement profile
ABB 3AUA0000107392 is the complete order identity for the drive optical communication module considered here. The purpose is to restore the approved optical DDCS link. The shared category photograph is illustrative; inspect the supplied ABB 3AUA0000107392 marking before acceptance.
Technical parameters and version boundary
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3AUA0000107392 |
| Product family | FDCO-01 optical DDCS communication options |
| Component role | drive optical communication module |
| Exact ABB order reference | 3AUA0000107392 |
| ABB product series | FDCO-01 optical DDCS communication options |
| ABB order code | 3AUA0000107392 |
| ABB product designation | FDCO-01 |
| Manufacturer description | FDCO-01; Optical DDCS communication 10/10 MBd FDCO-01 |
| ABB designation | FDCO-01 |
| Communication | Optical DDCS 10/10 MBd in manufacturer description |
| Listed version distinctions | 3AUA0000107392 FDCO-01: FDCO-01; Optical DDCS communication 10/10 MBd FDCO-01 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB 3AUA0000107392 values above identify the manufacturer-stated designation. Confirm all host-specific limits from the ABB 3AUA0000107392 instructions and installed-equipment record before treating a neighboring code as a substitute.
Selection gate
The controlling fit check for ABB 3AUA0000107392 is FDCO-01 host, optical channel and 10/10 MBd setting. Compare this directly with the supplied part and the approved bill of materials.
If an ABB 3AUA0000107392 variant differs in frame, voltage, slots, contacts or firmware, stop the substitution until engineering approves that specific variant.
Installed equipment record
For ABB 3AUA0000107392, record the breaker or drive type, hardware revision, wiring drawing and the existing part marking. Match the complete ABB 3AUA0000107392 code, not just the family name.
Photograph the ABB 3AUA0000107392 connection or mounting position and note the asset number. This makes a later replacement or fault investigation traceable.
Receiving and storage
On arrival, compare ABB 3AUA0000107392 with the purchase order, ABB label and quantity. Check seals, contacts, board edges or mechanical pieces as appropriate to the part type.
Store ABB 3AUA0000107392 under the conditions specified for its product family; protect electronics from static discharge and keep safety-related accessories with their identification.
Electrical and mechanical interface
Inspect ABB 3AUA0000107392 connectors, terminal designations, clearances and mounting features against the host instructions. Do not force an ABB 3AUA0000107392 part into a similar-looking assembly.
Where ABB 3AUA0000107392 carries a rated voltage, current or communication speed in the designation, confirm that the installed circuit is within the exact product limit.
Preparation for replacement
Before work on ABB 3AUA0000107392, isolate the relevant energy sources and follow the applicable site procedure. Capture configuration, wiring and original settings where the ABB 3AUA0000107392 role requires them.
Use the ABB 3AUA0000107392 host manual to confirm installation order, accessory compatibility, torque and protective covers before energizing.
Functional acceptance
After ABB 3AUA0000107392 has been installed, prove transmit, receive and diagnostics. Check the normal state and an appropriate alternate or fault state under the approved commissioning procedure.
Record ABB 3AUA0000107392 results, any parameter changes, residual alarms and the person approving return to service.
Future spare identification
Keep ABB 3AUA0000107392 in the asset spare list with the full order code, supported host and variant restrictions. A shorthand name can hide important technical differences.
For future enquiries, send the ABB 3AUA0000107392 designation together with a nameplate photo and the installation record so the exact replacement can be confirmed.
Related ABB codes in this product series
The following listed codes are represented on this ABB 3AUA0000107392 page and are not separate product pages. Check the complete code for every voltage, host, contact, function or board revision before ordering; membership in the same series is not proof of interchangeability.
- 3AUA0000107392 FDCO-01
Procurement handover
Include ABB 3AUA0000107392 and the verified host in the final spare-parts request.
Retain the ABB 3AUA0000107392 receipt and commissioning result with the equipment history.
