ABB 3AUA0000094518 specification for the actual host
ABB 3AUA0000094518 is the complete order identity for the drive interface module considered here. The purpose is to restore the documented NEXA-21 interface. The shared category photograph is illustrative; inspect the supplied ABB 3AUA0000094518 marking before acceptance.
Technical parameters and version boundary
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3AUA0000094518 |
| Product family | NEXA-21 drive interface options |
| Component role | drive interface module |
| Exact ABB order reference | 3AUA0000094518 |
| ABB product series | NEXA-21 drive interface options |
| ABB order code | 3AUA0000094518 |
| ABB product designation | NEXA-21 |
| Manufacturer description | NEXA-21; NEXA-21 |
| ABB designation | NEXA-21 |
| Scope | Exact function and host compatibility require module documentation |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB 3AUA0000094518 values above identify the manufacturer-stated designation. Confirm all host-specific limits from the ABB 3AUA0000094518 instructions and installed-equipment record before treating a neighboring code as a substitute.
Installed equipment record
For ABB 3AUA0000094518, record the breaker or drive type, hardware revision, wiring drawing and the existing part marking. Match the complete ABB 3AUA0000094518 code, not just the family name.
Photograph the ABB 3AUA0000094518 connection or mounting position and note the asset number. This makes a later replacement or fault investigation traceable.
Selection gate
The controlling fit check for ABB 3AUA0000094518 is NEXA-21 host, firmware and wiring. Compare this directly with the supplied part and the approved bill of materials.
If an ABB 3AUA0000094518 variant differs in frame, voltage, slots, contacts or firmware, stop the substitution until engineering approves that specific variant.
Electrical and mechanical interface
Inspect ABB 3AUA0000094518 connectors, terminal designations, clearances and mounting features against the host instructions. Do not force an ABB 3AUA0000094518 part into a similar-looking assembly.
Where ABB 3AUA0000094518 carries a rated voltage, current or communication speed in the designation, confirm that the installed circuit is within the exact product limit.
Receiving and storage
On arrival, compare ABB 3AUA0000094518 with the purchase order, ABB label and quantity. Check seals, contacts, board edges or mechanical pieces as appropriate to the part type.
Store ABB 3AUA0000094518 under the conditions specified for its product family; protect electronics from static discharge and keep safety-related accessories with their identification.
Preparation for replacement
Before work on ABB 3AUA0000094518, isolate the relevant energy sources and follow the applicable site procedure. Capture configuration, wiring and original settings where the ABB 3AUA0000094518 role requires them.
Use the ABB 3AUA0000094518 host manual to confirm installation order, accessory compatibility, torque and protective covers before energizing.
Functional acceptance
After ABB 3AUA0000094518 has been installed, verify the commissioned interface behavior. Check the normal state and an appropriate alternate or fault state under the approved commissioning procedure.
Record ABB 3AUA0000094518 results, any parameter changes, residual alarms and the person approving return to service.
Future spare identification
Keep ABB 3AUA0000094518 in the asset spare list with the full order code, supported host and variant restrictions. A shorthand name can hide important technical differences.
For future enquiries, send the ABB 3AUA0000094518 designation together with a nameplate photo and the installation record so the exact replacement can be confirmed.
Procurement handover
Include ABB 3AUA0000094518 and the verified host in the final spare-parts request.
Retain the ABB 3AUA0000094518 receipt and commissioning result with the equipment history.
