Field record for ABB 1SVR405667R0000 and its host
ABB 1SVR405667R0000 names the exact universal-relay plug-in module used in this service profile. Its job is to provide the specified CR-U plug-in function. The category image is a reference image, not proof that the delivered ABB 1SVR405667R0000 has the same physical configuration.
Technical data for the order code
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SVR405667R0000 |
| Product family | CR-U T plug-in function modules |
| Component role | universal-relay plug-in module |
| Exact ABB order reference | 1SVR405667R0000 |
| ABB product series | CR-U T plug-in function modules |
| ABB order code | 1SVR405667R0000 |
| Manufacturer designation | CR-U T |
| Manufacturer product text | The CR-U T plug-in module is a pluggable function module. The module is suitable for the sockets CR-U2S and CR-U3S. This module provides several timing functions. The rated control supply voltage is 24-240 V AC / DC. CR-U T |
| ABB designation | CR-U T |
| Host | CR-U2S and CR-U3S sockets in ABB description |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Read the ABB 1SVR405667R0000 designation alongside the installed-equipment documentation. A difference in host, frame, connector, rating or kit contents can change whether ABB 1SVR405667R0000 is suitable.
Compare the supply item
Compare the delivered ABB 1SVR405667R0000 label and package with the approved order. Check CR-U2S/CR-U3S socket and function-module position before work begins.
If another ABB 1SVR405667R0000 configuration is proposed, have the design owner review its technical identity; similarity of appearance does not establish equivalence.
Plan the isolation
Before handling ABB 1SVR405667R0000, identify every relevant electrical and mechanical energy source. Apply the approved lockout and stored-energy discharge procedure.
Keep ABB 1SVR405667R0000 installation instructions available at the work point. Observe the host manufacturer's limits for connection, torque, clearance and protective covers.
Record the current assembly
Find the existing ABB 1SVR405667R0000 position on the drawing and take a legible photograph of the installed marking. Record the host model, serial or frame identifier and revision.
For ABB 1SVR405667R0000, capture the wiring, mounting orientation and any parameter image before removing the existing component.
Fit and inspect
Install ABB 1SVR405667R0000 in the documented location without forcing plugs, shafts or terminals. Check that labels remain readable and routing matches the original drawing.
Inspect ABB 1SVR405667R0000 fasteners, strain relief, insulation, barriers and intended movement as relevant to this specific component.
Functional evidence
With the assembly made safe for an authorized test, verify module seating and intended circuit behavior. Include the relevant alternate state or alarm condition for ABB 1SVR405667R0000.
Record the ABB 1SVR405667R0000 test steps, observed results and any deviations. Do not close the maintenance record on an unverified function.
Keep the spare record usable
Store the complete ABB 1SVR405667R0000 order code with the supported host and the tested configuration. Keep replacement and commissioning records with the asset.
When requesting ABB 1SVR405667R0000 again, include the full designation and known variant restrictions rather than a short family label.
Return-to-service decision
Compare ABB 1SVR405667R0000 behavior against the approved acceptance criteria. Review protection, cooling, communication or relay response as appropriate to the role.
Only return equipment to service when ABB 1SVR405667R0000 identification, installation and functional results have been signed off.
Service handover
State the accepted ABB 1SVR405667R0000 code in the final maintenance and procurement record.
Retain the ABB 1SVR405667R0000 test evidence for the next service intervention.
