ABB 1SFL547074R8011 installation evidence and product identity
ABB 1SFL547074R8011 is the complete order code for this AX-series industrial contactor. The planned function is to switch the approved AX260 motor or feeder circuit. A shared category photo is shown for orientation only; confirm the delivered ABB 1SFL547074R8011 label and hardware before acceptance.
Key technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SFL547074R8011 |
| Product family | AX260 three-pole contactor options |
| Component role | AX-series industrial contactor |
| Exact ABB order reference | 1SFL547074R8011 |
| ABB product series | AX260 three-pole contactor options |
| ABB order identity | 1SFL547074R8011 |
| Manufacturer designation | AX260-30-11-80 |
| ABB product description | AX260-30-11-80 Contactor AX260-30-11-80 |
| Representative | AX260-30-11-80 |
| Other version | AX260-30-11-84 uses another ABB code |
| Boundary | Check the full coil code for each option |
| Version-specific notes | 1SFL547074R8411: AX260-30-11-84 Contactor AX260-30-11-84 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB 1SFL547074R8011 table separates manufacturer-stated facts from checks that depend on the installed system. Do not transfer an adjacent version's rating or approval to ABB 1SFL547074R8011 without its own manufacturer evidence.
Configuration to compare
The decisive ABB 1SFL547074R8011 comparison is AX260 frame, -80 versus -84 coil and auxiliary contacts. Check the marking and documentation for every selected option.
For ABB 1SFL547074R8011, record any difference in coil, voltage, poles, interface, fan form or physical packaging before approving a substitute.
The equipment this part serves
Identify the host equipment and the exact place where ABB 1SFL547074R8011 is installed. Record the drawing reference, equipment tag and current component marking.
A procurement request for ABB 1SFL547074R8011 should include the host frame or system version, not merely a product-category name.
Receiving controls
Compare the ABB 1SFL547074R8011 package and unit marking with the purchase order. Check quantity, damage and any supplied accessory parts.
Set ABB 1SFL547074R8011 aside for engineering review if the exact code, ratings or construction differ from the authorized design.
Electrical and mounting review
Inspect the ABB 1SFL547074R8011 terminals, connectors, mounting and protective clearances in the context of the installed assembly.
Where ABB 1SFL547074R8011 needs software or settings, preserve the approved configuration and note its revision before replacing hardware.
Installation sequence
Isolate the relevant supply and stored energy before touching ABB 1SFL547074R8011. Follow the site procedure and the host manufacturer's installation instructions.
After fitting ABB 1SFL547074R8011, confirm the mechanical position, wiring map, insulation and operating clearance before energizing.
Site acceptance
When the assembly is ready for an authorized test, test three main poles and auxiliary feedback. Check the normal response and the relevant alternate or alarm state.
Save the ABB 1SFL547074R8011 measured observations, sign-off and any changed settings in the equipment record.
Next purchase reference
Keep the full ABB 1SFL547074R8011 code, installed host and approved configuration together in the spare-parts register.
Future ABB 1SFL547074R8011 enquiries should include these records so a visually similar but different variant is not ordered by mistake.
Other ABB order codes in this series
These codes are represented by the ABB 1SFL547074R8011 page and will not be published as separate product pages. Differences in frame, coil, auxiliary arrangement, construction or rating still require an individual check; they are not automatically interchangeable.
- 1SFL547074R8411
Documented handover
Use ABB 1SFL547074R8011 in full on the purchase and maintenance record.
Keep the ABB 1SFL547074R8011 commissioning result with the equipment history.
