Specifying ABB 1SFL497001R7011 for the correct assembly
ABB 1SFL497001R7011 is the complete order code for this industrial power contactor. The planned function is to switch the documented three-phase power circuit. A shared category photo is shown for orientation only; confirm the delivered ABB 1SFL497001R7011 label and hardware before acceptance.
Key technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SFL497001R7011 |
| Product family | AF185 three-pole contactors |
| Component role | industrial power contactor |
| Exact ABB order reference | 1SFL497001R7011 |
| ABB product series | AF185 three-pole contactors |
| ABB order identity | 1SFL497001R7011 |
| Manufacturer designation | AF185-30-11-70 |
| ABB product description | A 3-phase Contactor suitable for various applications such as Motor starting, Isolation, By-pass and Distribution application up to max 1000 V. Operated with wide control voltage range 100-250 V, AC/DC AF185-30-11-70 |
| ABB designation | AF185-30-11-70 |
| Contact scheme | 30-11 in designation; verify installed auxiliaries |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB 1SFL497001R7011 table separates manufacturer-stated facts from checks that depend on the installed system. Do not transfer an adjacent version's rating or approval to ABB 1SFL497001R7011 without its own manufacturer evidence.
The equipment this part serves
Identify the host equipment and the exact place where ABB 1SFL497001R7011 is installed. Record the drawing reference, equipment tag and current component marking.
A procurement request for ABB 1SFL497001R7011 should include the host frame or system version, not merely a product-category name.
Configuration to compare
The decisive ABB 1SFL497001R7011 comparison is AF185 frame, coil code and auxiliary contacts. Check the marking and documentation for every selected option.
For ABB 1SFL497001R7011, record any difference in coil, voltage, poles, interface, fan form or physical packaging before approving a substitute.
Electrical and mounting review
Inspect the ABB 1SFL497001R7011 terminals, connectors, mounting and protective clearances in the context of the installed assembly.
Where ABB 1SFL497001R7011 needs software or settings, preserve the approved configuration and note its revision before replacing hardware.
Receiving controls
Compare the ABB 1SFL497001R7011 package and unit marking with the purchase order. Check quantity, damage and any supplied accessory parts.
Set ABB 1SFL497001R7011 aside for engineering review if the exact code, ratings or construction differ from the authorized design.
Installation sequence
Isolate the relevant supply and stored energy before touching ABB 1SFL497001R7011. Follow the site procedure and the host manufacturer's installation instructions.
After fitting ABB 1SFL497001R7011, confirm the mechanical position, wiring map, insulation and operating clearance before energizing.
Site acceptance
When the assembly is ready for an authorized test, prove coil pickup, release and main contacts. Check the normal response and the relevant alternate or alarm state.
Save the ABB 1SFL497001R7011 measured observations, sign-off and any changed settings in the equipment record.
Next purchase reference
Keep the full ABB 1SFL497001R7011 code, installed host and approved configuration together in the spare-parts register.
Future ABB 1SFL497001R7011 enquiries should include these records so a visually similar but different variant is not ordered by mistake.
Documented handover
Use ABB 1SFL497001R7011 in full on the purchase and maintenance record.
Keep the ABB 1SFL497001R7011 commissioning result with the equipment history.
