ZC2JC1 technical identity and replacement considerations for OsiSense XC fixed limit-switch body
ZC2JC1 is the complete ordering reference for a Schneider Electric OsiSense XC fixed limit-switch body. This page identifies the confirmed characteristics of ZC2JC1 and the practical fit checks for an existing installation. The shared category collage is a reference image, not an exact photograph of ZC2JC1.
Technical parameters and confirmed identity
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | ZC2JC1 |
| Product type | OsiSense XC fixed limit-switch body |
| Contacts | 1 changeover, snap action |
| Body | Fixed metal body |
| Cable entry | Pg 13.5 gland |
What the code identifies
The ZC2JC1 designation identifies the part above, not every accessory in the complete system. Purchase and maintenance records should retain the exact ZC2JC1 characters, including any suffix. Where a similar-looking reference exists, compare its full specification rather than treating it as an automatic replacement.
For ZC2JC1, the parameter table separates product identity from site-specific engineering decisions. Ratings in a family brochure may cover several variants; the installed ZC2JC1 nameplate and current manufacturer data remain the final order check.
Application fit and engineering boundaries
This is a switch body; verify the mating head and actuator before ordering an assembly.
Before accepting ZC2JC1, compare the existing panel or machine drawing with the relevant voltage, current, contact, network, pressure or mechanical interface noted for this product. Record cable entry, mounting space, connected load and environmental conditions where applicable.
A procurement request for ZC2JC1 should state the equipment tag and purpose, not just the part number. If the original unit has options or accessories, list them separately; a replacement ZC2JC1 may not include those items.
Installation and functional record
Qualified personnel should isolate the equipment under the site's procedure before fitting ZC2JC1. Photograph the original connections, label conductors, and retain any software or parameter backup relevant to ZC2JC1.
After installation of ZC2JC1, test the operating sequence in a safe state. Record measured supply or signal values, status indications, alarms and the final ZC2JC1 reference on the handover sheet.
If ZC2JC1 is a safety, protection or switching component, complete the application-specific coordination and validation process. The information here is not a substitute for the machine risk assessment or electrical design review.
Similar-looking codes covered by this page
The following codes resemble ZC2JC1 and are grouped here as reference variants, so they are not scheduled as separate product pages. Similar spelling does not mean electrical or mechanical interchangeability. Compare each full code, option and rating to ZC2JC1.
Order release checklist
For ZC2JC1, confirm the full designation, the actual installed interface, the rating or setting in the table, and the availability of any required mating part. Mark any deviation from the original ZC2JC1 installation for engineering review.
The final ZC2JC1 selection should be checked against current Schneider Electric product documentation and the delivered device label. Preserve the commissioning record with the order so future ZC2JC1 service decisions remain traceable.
