Field reference for ZBRA1 Harmony XB5R wireless receiver antenna
Use ZBRA1 as the exact identifier when requesting this Harmony XB5R wireless receiver antenna. The category image is a shared reference illustration, not an exact photograph of the particular ZBRA1 variant. The nameplate and current manufacturer documentation govern the installed item.
Technical identification
| Technical item | Verified value / selection note |
|---|---|
| Exact requested code | ZBRA1 |
| Product identity | Harmony XB5R wireless receiver antenna |
| System | Harmony XB5R wireless and batteryless controls |
| Role | Remote antenna / relay accessory |
| Cable | Check supplied 5 m connection and receiver pairing |
Order and receiving check
State ZBRA1 in the enquiry and purchase line, together with quantity, destination and required documents. When ZBRA1 arrives, compare its printed code, packaging, accessories and revision with the approved order. Do not accept a neighboring suffix as equivalent without an engineering review.
Commissioning checkpoint
Install ZBRA1 only after the applicable isolation and safety procedure. Verify mounting, terminals, electrical supply or signal levels, and functional response relevant to Harmony XB5R wireless receiver antenna. Record test results and the as-fitted designation ZBRA1 for later maintenance.
Before removal
For an installed ZBRA1, record the panel location, connected circuit, terminal labels and the operating state. Photograph the ZBRA1 nameplate and assembly before disconnecting anything. Check receiver pairing and the permitted mounting distance for the installation. A physically similar device may use a different rating or contact arrangement.
Configuration notes
The reference ZBRA1 should remain attached to drawings, settings and service records. If ZBRA1 is part of a larger starter, switch, sensor or UPS assembly, check every host component and accessory as well as this individual code. A catalogue family name alone does not identify a fully configured assembly.
For a replacement request, compare the existing ZBRA1 against the offered ZBRA1 documentation: dimensions, electrical duty, interface and regional certification can all matter. Record any approved variation explicitly so the next technician does not treat visual resemblance as evidence of interchangeability.
Visually similar model references
These 1 additional codes have a visible ZBRA pattern and are indexed with the representative ZBRA1 page for search convenience. They are not automatically the same product or an approved substitute for ZBRA1; verify each complete designation, function and rating independently.
Handover record
Retain the quotation, approval, installation test and final ZBRA1 nameplate record. When the next service cycle starts, specify ZBRA1 in full and review the real duty before ordering. The shared image does not replace a technical review of ZBRA1.
