XZCC12FCM40B M12 connector: pinout and sensor-cable assembly
When a replacement request says XZCC12FCM40B, retain every character of the code. This Telemecanique Sensors M12 connector entry explains what can be confirmed for XZCC12FCM40B and what must still be checked on site. The reused collage illustrates the category only.
Verified rating table
| Technical item | Verified value / selection note |
|---|---|
| Complete code | XZCC12FCM40B |
| Product family | Telemecanique Sensors M12 connector |
| Connector | Female M12, 4 pins, elbowed |
| Cable entry | Pg7 gland |
| Rating | 3 A, IP67 class when assembled correctly |
Application context
This is a field connector, not a sensor. Match the mating M12 key, cable diameter and pin assignment before wiring.
The XZCC12FCM40B nameplate should be cross-checked with the associated panel drawing and current manufacturer instructions. A neighboring XZCC12FCM40B family code may look alike while changing voltage, contacts, enclosure or output type.
For XZCC12FCM40B, compare the verified attributes above with the site's supply, duty and protective scheme. Treat a close-looking variant as a proposal requiring an explicit comparison.
After installing XZCC12FCM40B, test the intended response and document settings, status and any alarms. Keep a traceable record of the delivered XZCC12FCM40B reference.
Read the entire XZCC12FCM40B label, including suffixes. Record the host equipment and the existing wiring or mechanical interface before accepting stock.
Installation record
Assemble the gland and screen/earthing as instructed, then test continuity and water ingress protection for the installed environment.
Keep the XZCC12FCM40B order record with any accessory list, software backup and functional test report. If XZCC12FCM40B has a regional lifecycle notice or safety advisory, review it for the specific delivered item before use.
Related codes in this group
These 3 codes resemble XZCC12FCM40B and are covered as related references here rather than separate product pages in this batch. They are not automatically interchangeable with XZCC12FCM40B; compare each complete designation.
- XZCC12FDM40B
- XZCC12MCM40B
- XZCC12MDP40B
Before an order is released
The purchase request for XZCC12FCM40B should include the complete XZCC12FCM40B reference, equipment ID, site voltage, mating device and a photograph of the original label. Confirm current documentation and stock status for XZCC12FCM40B before purchase.
Additional Schneider XZCC visually similar model codes
These ordering strings are grouped because their printed model codes look similar. They may represent different product types, functions, ratings, accessories or approvals. This list is not an interchangeability claim; verify the exact manufacturer data before ordering.
- XZCC20FCM30B
- XZCC43FCP40B
- XZCC8FDM30V
