XUK1ARCNL2 reflex sensor: reflector alignment and wide supply
When a replacement request says XUK1ARCNL2, retain every character of the code. This XUK reflex photoelectric sensor entry explains what can be confirmed for XUK1ARCNL2 and what must still be checked on site. The reused collage illustrates the category only.
Verified rating table
| Technical item | Verified value / selection note |
|---|---|
| Complete code | XUK1ARCNL2 |
| Product family | XUK reflex photoelectric sensor |
| Detection | Reflex mode, nominal 7 m class |
| Supply | 24–240 V AC/DC |
| Connection | Pre-cabled 2 m |
Application context
Confirm the installed reflector and target distance. The nominal range depends on alignment and target conditions, so do not substitute a diffuse-mode sensor by appearance.
The XUK1ARCNL2 nameplate should be cross-checked with the associated panel drawing and current manufacturer instructions. A neighboring XUK1ARCNL2 family code may look alike while changing voltage, contacts, enclosure or output type.
For XUK1ARCNL2, compare the verified attributes above with the site's supply, duty and protective scheme. Treat a close-looking variant as a proposal requiring an explicit comparison.
After installing XUK1ARCNL2, test the intended response and document settings, status and any alarms. Keep a traceable record of the delivered XUK1ARCNL2 reference.
Read the entire XUK1ARCNL2 label, including suffixes. Record the host equipment and the existing wiring or mechanical interface before accepting stock.
Installation record
Check output contact logic and cable wiring, then test target-present and target-absent states across the operating speed range.
Keep the XUK1ARCNL2 order record with any accessory list, software backup and functional test report. If XUK1ARCNL2 has a regional lifecycle notice or safety advisory, review it for the specific delivered item before use.
Related codes in this group
These 5 codes resemble XUK1ARCNL2 and are covered as related references here rather than separate product pages in this batch. They are not automatically interchangeable with XUK1ARCNL2; compare each complete designation.
- XUK5APANM12
- XUK8AKSNM12
- XUK8TAE1MM12
- XUK8TAE2MM12
- XUK8APSML02M12
Before an order is released
The purchase request for XUK1ARCNL2 should include the complete XUK1ARCNL2 reference, equipment ID, site voltage, mating device and a photograph of the original label. Confirm current documentation and stock status for XUK1ARCNL2 before purchase.
