XS630B1PAL2 M30 proximity sensor: target clearance and PNP wiring
The practical question for XS630B1PAL2 is whether the offered component fits the electrical and mechanical design. This XS6 inductive proximity sensor page separates verified attributes from field checks. Its shared main picture shows the broader category, not the precise XS630B1PAL2 variant.
Verified product attributes
| Technical item | Verified value / selection note |
|---|---|
| Exact ordering code | XS630B1PAL2 |
| Product family | XS6 inductive proximity sensor |
| Housing | M30 cylindrical brass |
| Nominal sensing distance | 15 mm |
| Output / cable | PNP normally open, pre-cabled 2 m |
| Supply | 12–48 V DC class |
On-site replacement notes
Document the PNP input, supply polarity and cable routing before replacement. Test both target-present and target-absent states at normal machine speed.
For XS630B1PAL2, compare the exact nameplate, wiring diagram and manufacturer literature before allowing a substitution. A close-looking suffix can change ratings, interface or delivered components.
What to confirm on the installed unit
Check whether the metal target reaches the specified sensing zone under worst-case mechanical travel. The nominal 15 mm value does not remove the need for mounting and derating checks.
Document the existing XS630B1PAL2 circuit, accessories and setpoints before removing hardware. Use the site's isolation and commissioning procedures, and preserve the approved engineering record.
Before energizing or commissioning
Document the PNP input, supply polarity and cable routing before replacement. Test both target-present and target-absent states at normal machine speed.
The final choice of XS630B1PAL2 depends on the actual installation. Check ambient conditions, available space, mating parts and local electrical requirements rather than inferring fit from appearance.
Application fit
Check whether the metal target reaches the specified sensing zone under worst-case mechanical travel. The nominal 15 mm value does not remove the need for mounting and derating checks.
After fitting XS630B1PAL2, verify the intended function under representative operating conditions and record the result. A matching code does not eliminate the need for a functional check.
Other codes to compare carefully
The following 10 references resemble XS630B1PAL2 in their designation. They are grouped here for inquiry and comparison, not claimed to be electrically interchangeable with XS630B1PAL2. Check each complete suffix, rating and connection before ordering.
XS630B1MAL2, XS630B1PAL5, XS630B1PBL2, XS630B1PAM12, XS630B1PBL2TF, XS630B1PBL5, XS630B1PAM12TF, XS630B1DAM12, XS630B1PBM12, XS630B4PAM12
Replacement decision
When requesting XS630B1PAL2, include the exact XS630B1PAL2 label, site voltage, connected equipment, installation photo and required quantity. State whether original XS630B1PAL2 stock or a documented engineering alternative is acceptable. Ask the supplier to confirm current availability, accessories and manufacturer documentation.
Before releasing XS630B1PAL2 to site, compare the delivered full code and terminal/connector arrangement with the approved bill of materials. Keep XS630B1PAL2 associated with its original application and obtain qualified review if any rating, function or lifecycle status differs.
Additional visually similar model designations
These printed codes resemble XS630B1PAL2 and are collected here for search only. A different code can specify a different function, rating or accessory. This is not a technical equivalence or interchangeability statement. Verify every full designation before ordering.
- XS608B1PAL2
- XS530B1PAM12
