XMJA0207 — Schneider legacy Telemecanique pressure-switch reference: procurement passport
XMJA0207 identifies a legacy Telemecanique pressure-switch reference. This page is a reference for identifying and quoting XMJA0207; the common main image is a Schneider category collage, not a guaranteed picture of the exact unit. Read the complete designation on the installed component before selecting a replacement.
Identification passport
| Technical item | Verified value / selection note |
|---|---|
| Full designation | XMJA0207 |
| Documented role | legacy Telemecanique pressure-switch reference |
| Product role | Pressure and vacuum switch |
| Legacy reference | XMJA0207 |
| Replacement note | Schneider FAQ names XMLA020A2S11; verify application |
Capture the entire reference and revision.
Check duty, mounting and connections.
Record the test and approved configuration.
Configuration boundary
The record above gives only the facts that can be supported for XMJA0207. It does not decode every suffix or establish every rating of XMJA0207. Ask for the original datasheet or configuration printout when the installed assembly includes options, firmware, a trip unit, a cable, a sensor or an interface card.
For XMJA0207, compare the equipment tag and system drawings with the visible markings. Confirm supply, poles, contacts, protocol, measured range, nominal force or network role as applicable. Do not copy a value from a similar-looking code. If a number is missing, leave it open until the manufacturer record or actual nameplate resolves it.
Procurement and receiving notes
Request an offer for the exact XMJA0207 designation and required quantity. The offer should identify stock condition, manufacturer, document revision, included accessories and any exclusions. If the supplier proposes an alternative to XMJA0207, ask for a separate written comparison rather than silently accepting a different product family.
At receipt, inspect the XMJA0207 label, packaging and supplied accessories. Keep the serial or batch number when present. For a protection, safety or control component, preserve the old settings and approved wiring design before the existing XMJA0207 is removed.
Site acceptance
Install XMJA0207 only under the applicable isolation and safety procedure. Commissioning must test the specific installed function: switching or protection behavior, relay I/O, sensor response, communication, valve travel or cabling continuity as relevant. A visual match does not prove that XMJA0207 has the correct settings or compatibility.
Record the test result and exact XMJA0207 code in the maintenance file. If the part is obsolete or service status differs by region, verify stock and approved migration path with the manufacturer. Keep a separate note for substitutions because the replacement may require engineering changes.
Related-looking references
No additional unassigned XMJ-pattern designation is indexed with XMJA0207. A possible variant still needs its own exact-code check.
Release statement
Use XMJA0207 as the search and purchase reference only when the verified identity and the site's requirements align. Review each unconfirmed configuration item before issuing an order. This XMJA0207 record is an identification aid, not a substitute for the manufacturer manual or a site-specific engineering approval.
