TM3DM24R field record for Modicon TM3 mixed digital I/O module selection
The TM3DM24R designation identifies a Schneider Electric Modicon TM3 mixed digital I/O module. This field record puts the confirmed TM3DM24R facts first, then the checks needed to release an order. The reused main-image collage is a category reference, not a photograph of the exact TM3DM24R unit.
Technical data / confirmed identity
| Technical item | Verified value / selection note |
|---|---|
| Complete code | TM3DM24R |
| Equipment type | Modicon TM3 mixed digital I/O module |
| Inputs | 16 |
| Outputs | 8 relay |
| Supply / terminals | 24 V DC, screw |
01 — Define the existing installation
Record the installed TM3DM24R label in full, the equipment tag, and any serial number, firmware or mechanical revision relevant to the assembly. A partial TM3DM24R designation does not establish compatibility.
Identify the supply, load, mating part, terminals, environment and available space before specifying TM3DM24R. Keep a photograph of the original label and the cabinet or machine drawing with the inquiry.
02 — Decide whether the reference fits
Confirm PLC compatibility, expansion sequence and output loading.
Compare the TM3DM24R parameters above with the actual circuit or machine duty. If the previous item has a different suffix, contact set, rating or enclosure, the proposed TM3DM24R must be reviewed as an engineered change.
03 — Install and document the result
Only qualified personnel should fit TM3DM24R after site isolation. Preserve settings and software backups where they apply to TM3DM24R; label wiring before removal and use current manufacturer instructions for the final connection.
Functional testing of TM3DM24R should cover the intended switching, signal, drive or protection response and any alarms. Record measured values and the final TM3DM24R designation. Safety-related parts require validation of the complete function.
Similar-looking catalog codes
The 11 codes below resemble TM3DM24R through their TM3D pattern and are covered on this representative page. They are not separate pages in this publishing set. Similar code shape is not proof that a listed code can replace TM3DM24R; compare the exact options and ratings.
Final release check
Before buying TM3DM24R, confirm its current manufacturer datasheet, actual delivered nameplate, regional availability and any lifecycle notice. Retain the TM3DM24R technical review, accessory list and commissioning results for later maintenance.
