SOMOVE SoMove PC setup software for motor-control devices — configuration and acceptance record
SOMOVE is the exact designation used for this SoMove PC setup software for motor-control devices entry. The picture is a shared Schneider-category reference collage, not an exact photograph of SOMOVE. Use the confirmed details below as the starting point for enquiry; the installed label and current manufacturer document govern final selection.
Technical data and identification
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | SOMOVE |
| Product identity | SoMove PC setup software for motor-control devices |
| Product type | PC setup and maintenance software |
| Configuration | Device Type Manager for the connected device |
| Connection options | Manufacturer describes USB/RJ45 or Bluetooth links |
Site information to collect
Before ordering SOMOVE, write down the existing equipment tag, location and duty. Verify the exact device DTM, software version and access rights before commissioning. Capture a legible photograph of the complete SOMOVE marking so that voltage, option suffix and revision can be compared with the quotation.
Check the mating equipment around SOMOVE: supply and load wiring, mechanical mounting, protection, communications or software interface as appropriate. The table intentionally separates documented facts from values that depend on a complete configured variant. Never infer a missing rating from a shared image or from another model whose code merely resembles SOMOVE.
Quotation worksheet
- Complete SOMOVE designation and quantity
- Condition, revision and applicable manufacturer documentation
- Included accessories, exclusions and delivery region
- Any proposed substitution identified separately for approval
For SOMOVE, ask the supplier to quote the exact reference and disclose any deviation. A suffix, pole count, communications port, certification or terminal style can change the installation even when the front appearance is similar. If the original SOMOVE is obsolete, confirm availability and obtain an engineering-reviewed migration path rather than assuming a current series is a direct swap.
Installation and commissioning record
Keep the isolation and safety procedure for the equipment that uses SOMOVE. Compare delivered markings, package condition and accessories with the approved order. Record hardware and firmware revisions where present; preserve settings and backups before an installed SOMOVE is removed.
The acceptance test for SOMOVE should match its actual duty: switching or trip performance, protective settings, measured values, motion direction, software connection or busway continuity as applicable. Use qualified personnel and the manufacturer's commissioning instructions. A passing visual inspection alone does not prove that SOMOVE is correctly configured.
Similar-looking designations
No additional unassigned SOMOVE-pattern code is indexed with SOMOVE. A different complete designation still requires its own technical check.
Release decision
Approve SOMOVE for procurement only after the exact model, documented product role, site connections and supplier offer agree. Keep SOMOVE on the purchase and receiving records. If a substitute is proposed, document the differences and obtain approval before fitting it.
