RXZE14P field record for Harmony RXM push-in relay socket selection
The RXZE14P designation identifies a Schneider Electric Harmony RXM push-in relay socket. This field record puts the confirmed RXZE14P facts first, then the checks needed to release an order. The reused main-image collage is a category reference, not a photograph of the exact RXZE14P unit.
Technical data / confirmed identity
| Technical item | Verified value / selection note |
|---|---|
| Complete code | RXZE14P |
| Equipment type | Harmony RXM push-in relay socket |
| Relay compatibility | RXM2 / RXM4 family |
| Contacts supported | 2CO 12 A or 4CO 6 A class |
| Terminals | Spring-clamp push-in |
01 — Define the existing installation
Record the installed RXZE14P label in full, the equipment tag, and any serial number, firmware or mechanical revision relevant to the assembly. A partial RXZE14P designation does not establish compatibility.
Identify the supply, load, mating part, terminals, environment and available space before specifying RXZE14P. Keep a photograph of the original label and the cabinet or machine drawing with the inquiry.
02 — Decide whether the reference fits
Match relay pin pattern and cabinet wiring.
Compare the RXZE14P parameters above with the actual circuit or machine duty. If the previous item has a different suffix, contact set, rating or enclosure, the proposed RXZE14P must be reviewed as an engineered change.
03 — Install and document the result
Only qualified personnel should fit RXZE14P after site isolation. Preserve settings and software backups where they apply to RXZE14P; label wiring before removal and use current manufacturer instructions for the final connection.
Functional testing of RXZE14P should cover the intended switching, signal, drive or protection response and any alarms. Record measured values and the final RXZE14P designation. Safety-related parts require validation of the complete function.
Similar-looking catalog codes
The 10 codes below resemble RXZE14P through their RXZE pattern and are covered on this representative page. They are not separate pages in this publishing set. Similar code shape is not proof that a listed code can replace RXZE14P; compare the exact options and ratings.
Final release check
Before buying RXZE14P, confirm its current manufacturer datasheet, actual delivered nameplate, regional availability and any lifecycle notice. Retain the RXZE14P technical review, accessory list and commissioning results for later maintenance.
Additional Schneider RXZ visually similar model codes
These ordering strings are grouped because their printed model codes look similar. They may represent different product types, functions, ratings, accessories or approvals. This list is not an interchangeability claim; verify the exact manufacturer data before ordering.
- RXZ400
- RXZL420
- RXZL520
- RXZR335
