Schneider RA16-227B-BI — identification, fit and receiving checks
The full RA16-227B-BI designation is the anchor for this legacy Rondo grounded socket outlet enquiry. The shared main image illustrates a Schneider-related category rather than the exact RA16-227B-BI unit. Use the physical nameplate and site drawing to settle the identity before comparing offers.
Documented technical record
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | RA16-227B-BI |
| Identified item | legacy Rondo grounded socket outlet |
| Family | Rondo |
| Variant | Verify color, shutters and wiring against catalog |
| Unconfirmed details | Obtain original unit label, revision and application drawing |
Only the documented facts above are stated for RA16-227B-BI. A family description, shortened code or supplier photograph cannot establish every rating and option. Record missing RA16-227B-BI data as an open item rather than assuming a standard variant.
1. Identify the installed item
Photograph the front label, side markings, terminals and accessories of RA16-227B-BI. Capture the assembly location, serial or revision where present, and the surrounding equipment. If the site refers to RA16-227B-BI by a short name, check that it matches the complete supplier reference.
Trace RA16-227B-BI in the electrical or control drawing and write down its actual job. For a switch or breaker, inspect the circuit and protection arrangement; for a drive or control board, check rack, firmware and cables; for a sensor or actuator, check signal, mechanical fit and process conditions.
2. Compare the proposed supply
Full code, revision, origin and condition.
Terminals, connectors, dimensions and mounting.
Inspection, documented test and warranty scope.
Request a quotation explicitly naming RA16-227B-BI, not simply a visually similar item. Compare the offer to the installed RA16-227B-BI with regard to ratings, environmental limits, connector coding and any required certificate. A substitute needs a separate written engineering approval.
The availability and lifecycle status of RA16-227B-BI may differ by region and date. Ask whether the offered RA16-227B-BI is factory-new, surplus, repaired or refurbished, and whether traceability and return rights apply. These commercial details are part of a usable maintenance decision.
3. Receive and test
At goods receipt, match the delivered RA16-227B-BI label to the approved order, inspect packaging and verify all included connectors or accessories. A qualified technician should follow the site's isolation procedure before installing RA16-227B-BI; the functional test must reflect the actual application.
Record test results, deviations and any replacement cross-reference next to RA16-227B-BI in the asset history. If a claim about RA16-227B-BI cannot be linked to a manufacturer document or the installed unit, keep it unresolved until the responsible engineer signs it off.
Other visually similar designations
A related code is a search reference only. It is not proof of identical manufacturer, function or interchangeability.
The following unused strings share the visible RA16- pattern with RA16-227B-BI. They are placed here for enquiry coverage only; functions, options and compatibility must be confirmed independently for each complete string.
Enquiry release
Release the RA16-227B-BI purchase enquiry when the exact code, technical boundary, offer condition and acceptance plan agree. Retain the full RA16-227B-BI wording in the order and receiving record so that any later variation is visible.
