PMESWT0100 Modicon M580 weighing module buyer specification and acceptance
Use the full PMESWT0100 designation when discussing this Modicon M580 weighing module with a supplier or engineer. The Schneider category main image is a shared reference collage, not an exact photo of PMESWT0100. The table records limited confirmed facts; the site-specific decision requires the current product document and installed-system information.
Verified technical reference
| Technical item | Verified value / selection note |
|---|---|
| Complete model | PMESWT0100 |
| Product identity | Modicon M580 weighing module |
| Application | Weighing scales |
| Platform | Modicon X80 / M580 |
| Component | Weighing module controller |
Where the item fits
The selection question for PMESWT0100 is not simply whether the code looks familiar. Identify its actual role as Modicon M580 weighing module, the equipment it connects to, and the site operating conditions. Check load-cell wiring and controller integration. Record any missing interface value as a question to verify rather than filling it from a neighboring model.
Keep PMESWT0100 in the equipment schedule with the intended host, panel or circuit. A shared product picture can show the general category, but it cannot verify terminal layout, voltage, current, firmware or mechanical dimensions of the delivered PMESWT0100.
Mating and integration checks
Before ordering PMESWT0100, compare electrical supply, protection, signals or communication settings where relevant. Confirm mechanical installation, mating connector and accessory dependencies. If an engineering drawing refers to another code, obtain an approved cross-reference before substituting PMESWT0100.
For maintenance replacement, capture the original nameplate and any revision label. Compare the complete string with PMESWT0100; a changed suffix can alter a component's function. Review thermal, environmental and safety limits with the manufacturer's exact documentation, not with a general family image.
Quotation and receiving controls
Ask for an offer naming PMESWT0100 exactly, with quantity, destination, lead time and current data sheet. Clarify whether a cable, fuse, mounting part, software or other accessory is included. If PMESWT0100 is discontinued, ask for a documented alternative and evaluate its differences before purchase.
When PMESWT0100 arrives, inspect package condition and label. Confirm that the full marking matches the approved order, photograph it and record the supplier's reference. Quarantine a unit labelled differently from PMESWT0100 until the substitution has been reviewed.
Installation and acceptance
Install PMESWT0100 under the applicable safe-isolation and manufacturer's instructions. Record relevant setting values, wiring, mounting and connected equipment. A functional test should demonstrate the intended role of PMESWT0100 without relying on code appearance alone.
Retain the final PMESWT0100 designation, the tested configuration and the location in the maintenance record. This allows a later buyer to distinguish the installed item from a similar-looking spare. Any change from PMESWT0100 should remain traceable to engineering approval.
Look-alike catalogue references
No additional unassigned PMES-pattern code is indexed under PMESWT0100. Any proposed alternate still requires its own identity and fit check.
Selection conclusion
Approve PMESWT0100 only when the verified product facts, installation interface and quotation agree. Keep the complete PMESWT0100 phrase in the purchase order and acceptance record; do not treat a near-looking designation as interchangeable without manufacturer and engineering evidence.
