PKE32M435 PratiKa industrial plug and its verified selection points
The full designation PKE32M435 identifies the requested PratiKa industrial plug. This record separates confirmed catalogue information from project-specific checks. The shared Schneider category image is a reference collage, not a photograph of the exact PKE32M435 variant.
Technical parameters and identity
| Technical item | Verified value / selection note |
|---|---|
| Complete model | PKE32M435 |
| Product identity | PratiKa industrial plug |
| Rated current | 32 A |
| Contacts | 3P + N + E |
| Voltage class | 415 V |
| Protection | IP44 listing |
Interface review
Start the PKE32M435 review at the interface it connects to: the host assembly, electrical supply, mating device or mechanical opening. Check the matching socket and cable gland. Do not infer the missing interface details from a short code or the category image.
For PKE32M435, record the existing installed marking and the intended location. Compare the full manufacturer's designation, mounting method, terminals, ratings and applicable standards. A visually similar code may differ in an option that changes the installation decision.
Documentation requested with a quotation
Ask the supplier to quote exactly PKE32M435 and provide the current manufacturer data sheet, installation instructions and any relevant dimensional drawing. State the destination country and quantity. If PKE32M435 is discontinued or regional, ask for availability and a documented alternative rather than assuming stock.
For a proposed replacement of PKE32M435, require a written cross-reference. Compare every affected rating and interface with the original engineering requirement before substituting. The presence of another number in the same visual family is not evidence of equivalence.
Installation and commissioning record
Before installing PKE32M435, check the delivered label, package condition and included accessories against the approved order. Keep a photo of the marking, the wiring or assembly diagram, and the equipment tag. Follow the product instructions for safe isolation and torque or mounting requirements.
After fitting PKE32M435, document the relevant functional test: operation, indication, protective coordination, communication or mechanical movement as applicable. Record any difference between the planned PKE32M435 and the actual supplied designation.
Visually similar catalogue codes
No remaining unassigned PKE-pattern designation is grouped with PKE32M435. Similar appearance alone should never replace a technical comparison.
Buyer decision
Approve PKE32M435 only after the confirmed parameters above and the project-specific interface checks are reconciled. In particular, identify the supply, protection, mounting and mating accessories that apply to PKE32M435; not all of these can be inferred from the designation alone.
Keep the final approved PKE32M435 designation on the procurement and receiving documents. If an alternative arrives, quarantine the change for engineering review before it is installed or energized.
