PC16-004B legacy Etude grounded socket outlet — application and acceptance notes
PC16-004B is the exact search and purchasing reference used on this page for the legacy Etude grounded socket outlet. The shared main-image collage represents the product category; it is not an exact photograph of PC16-004B. Identify the physical PC16-004B item and its environment before committing to a supply order.
Verified technical starting points
| Technical item | Verified value / selection note |
|---|---|
| Enquiry designation | PC16-004B |
| Identified role | legacy Etude grounded socket outlet |
| Family | Etude |
| Rating | 16 A |
| Variant | White socket with earth and shutters in legacy catalog |
| Configuration boundary | Confirm full label, revision and site compatibility |
The technical table for PC16-004B lists only points supported by the cited manufacturer or legacy product material. Any unstated suffix, revision, connector, electrical limit or approval for PC16-004B remains an open verification item. Do not infer interchangeability from a similar-looking code.
A four-step buyer checklist
- Confirm the complete code and revision on the installed unit.
- List every required interface, accessory and approval.
- Compare the offered unit or proposed substitute in writing.
- Define receipt inspection and functional acceptance.
Start the PC16-004B enquiry with a clear photograph of the nameplate and the original drawing. Include site location, quantity, condition required and delivery constraints. The supplier should quote the complete PC16-004B reference and explicitly call out any difference from the installed unit.
System fit and application
The relevant neighbours of PC16-004B may include a breaker frame, contactor, cable harness, communication rack, motor, HMI, battery system or software license. For PC16-004B, compare the actual interface in the application, not a generic family description. Check the documented voltage, current, mounting and software requirements only where they apply to this legacy Etude grounded socket outlet.
If a later-generation unit is offered in place of PC16-004B, require a manufacturer-supported cross-reference or a site engineering comparison. A recommended successor may still need new terminals, commissioning steps or revised approvals. Retain PC16-004B in the audit trail even if the approved order uses another code.
Confirm identity, application fit, condition, supplier evidence and receiving plan before order release.
Inspection and handover
When PC16-004B arrives, compare the label to the approved purchase record and inspect packaging and fitted accessories. A qualified technician should follow site isolation rules, verify the mechanical and electrical interfaces, and record the appropriate protection, signal, communication or operating test for PC16-004B.
File the PC16-004B test result, serial or license information and any deviation approval with the equipment record. For a legacy PC16-004B unit, separately confirm support status and whether the offered stock is new, used or refurbished. Warranty and acceptance conditions should reflect that distinction.
Visually related model strings
No further unassigned PC16--pattern code is grouped with PC16-004B in this batch. Any alternative still needs a documented comparison to the complete PC16-004B requirement.
Decision record
Close the PC16-004B enquiry only after the offer, technical comparison and receiving evidence agree. Preserve the exact PC16-004B string in the final procurement file and make each accepted substitution explicit.
