Specification record for P3F30-CGGGG-DAEOA-BCAAR PowerLogic P3F30 feeder-protection relay configuration
P3F30-CGGGG-DAEOA-BCAAR identifies a PowerLogic P3F30 feeder-protection relay configuration. This page is a reference for identifying and quoting P3F30-CGGGG-DAEOA-BCAAR; the common main image is a Schneider category collage, not a guaranteed picture of the exact unit. Read the complete designation on the installed component before selecting a replacement.
Identification passport
| Technical item | Verified value / selection note |
|---|---|
| Full designation | P3F30-CGGGG-DAEOA-BCAAR |
| Documented role | PowerLogic P3F30 feeder-protection relay configuration |
| Relay family | PowerLogic P3F30 |
| Application | Feeder protection |
| Exact options | Full suffix requires Schneider configuration record |
Capture the entire reference and revision.
Check duty, mounting and connections.
Record the test and approved configuration.
Configuration boundary
The record above gives only the facts that can be supported for P3F30-CGGGG-DAEOA-BCAAR. It does not decode every suffix or establish every rating of P3F30-CGGGG-DAEOA-BCAAR. Ask for the original datasheet or configuration printout when the installed assembly includes options, firmware, a trip unit, a cable, a sensor or an interface card.
For P3F30-CGGGG-DAEOA-BCAAR, compare the equipment tag and system drawings with the visible markings. Confirm supply, poles, contacts, protocol, measured range, nominal force or network role as applicable. Do not copy a value from a similar-looking code. If a number is missing, leave it open until the manufacturer record or actual nameplate resolves it.
Procurement and receiving notes
Request an offer for the exact P3F30-CGGGG-DAEOA-BCAAR designation and required quantity. The offer should identify stock condition, manufacturer, document revision, included accessories and any exclusions. If the supplier proposes an alternative to P3F30-CGGGG-DAEOA-BCAAR, ask for a separate written comparison rather than silently accepting a different product family.
At receipt, inspect the P3F30-CGGGG-DAEOA-BCAAR label, packaging and supplied accessories. Keep the serial or batch number when present. For a protection, safety or control component, preserve the old settings and approved wiring design before the existing P3F30-CGGGG-DAEOA-BCAAR is removed.
Site acceptance
Install P3F30-CGGGG-DAEOA-BCAAR only under the applicable isolation and safety procedure. Commissioning must test the specific installed function: switching or protection behavior, relay I/O, sensor response, communication, valve travel or cabling continuity as relevant. A visual match does not prove that P3F30-CGGGG-DAEOA-BCAAR has the correct settings or compatibility.
Record the test result and exact P3F30-CGGGG-DAEOA-BCAAR code in the maintenance file. If the part is obsolete or service status differs by region, verify stock and approved migration path with the manufacturer. Keep a separate note for substitutions because the replacement may require engineering changes.
Related-looking references
These 1 designations resemble the P3F30 portion of P3F30-CGGGG-DAEOA-BCAAR. They are gathered here for finding an enquiry only; a related-looking reference can have a different function, rating or interface and is not automatically interchangeable with P3F30-CGGGG-DAEOA-BCAAR.
Release statement
Use P3F30-CGGGG-DAEOA-BCAAR as the search and purchase reference only when the verified identity and the site's requirements align. Review each unconfirmed configuration item before issuing an order. This P3F30-CGGGG-DAEOA-BCAAR record is an identification aid, not a substitute for the manufacturer manual or a site-specific engineering approval.
Additional similar-looking designations
P3-prefixed protection references are indexed here for search and enquiry. They may designate different hardware, functions or configurations and are not automatically interchangeable. Check each exact reference, rating and manufacturer record.
