Identify M9A26914 Multi9 OF auxiliary changeover contact before a service order
Use M9A26914 as the exact identifier when requesting this Multi9 OF auxiliary changeover contact. The category image is a shared reference illustration, not an exact photograph of the particular M9A26914 variant. The nameplate and current manufacturer documentation govern the installed item.
Technical identification
| Technical item | Verified value / selection note |
|---|---|
| Exact requested code | M9A26914 |
| Product identity | Multi9 OF auxiliary changeover contact |
| Contact | 1 changeover OF contact |
| Connection | Bottom connection |
| Application | Multi9 status indication |
| Low-current range | 2 to 100 mA per regional listing |
Order and receiving check
State M9A26914 in the enquiry and purchase line, together with quantity, destination and required documents. When M9A26914 arrives, compare its printed code, packaging, accessories and revision with the approved order. Do not accept a neighboring suffix as equivalent without an engineering review.
Commissioning checkpoint
Install M9A26914 only after the applicable isolation and safety procedure. Verify mounting, terminals, electrical supply or signal levels, and functional response relevant to Multi9 OF auxiliary changeover contact. Record test results and the as-fitted designation M9A26914 for later maintenance.
Before removal
For an installed M9A26914, record the panel location, connected circuit, terminal labels and the operating state. Photograph the M9A26914 nameplate and assembly before disconnecting anything. Confirm the exact host breaker and monitoring-circuit rating. A physically similar device may use a different rating or contact arrangement.
Configuration notes
The reference M9A26914 should remain attached to drawings, settings and service records. If M9A26914 is part of a larger starter, switch, sensor or UPS assembly, check every host component and accessory as well as this individual code. A catalogue family name alone does not identify a fully configured assembly.
For a replacement request, compare the existing M9A26914 against the offered M9A26914 documentation: dimensions, electrical duty, interface and regional certification can all matter. Record any approved variation explicitly so the next technician does not treat visual resemblance as evidence of interchangeability.
Visually similar model references
These 1 additional codes have a visible M9A pattern and are indexed with the representative M9A26914 page for search convenience. They are not automatically the same product or an approved substitute for M9A26914; verify each complete designation, function and rating independently.
Handover record
Retain the quotation, approval, installation test and final M9A26914 nameplate record. When the next service cycle starts, specify M9A26914 in full and review the real duty before ordering. The shared image does not replace a technical review of M9A26914.
