Schneider LXM52DD12C41000 Lexium 52 single drive: service and selection card
LXM52DD12C41000 is the complete designation for a Schneider Electric Lexium 52 single drive. This page gives the verified identity and a practical handover checklist for LXM52DD12C41000; the shared category image is illustrative, not a photograph of the exact LXM52DD12C41000 item.
Technical data to check
| Technical item | Verified value / selection note |
|---|---|
| Complete model | LXM52DD12C41000 |
| Product identity | Lexium 52 single drive |
| Drive family | Lexium 52 |
| Output current | 3 A continuous / 12 A peak; confirm conditions |
| Architecture | Single servo drive |
Application checkpoint
Check mains, motor feedback and machine control project. Confirm the exact LXM52DD12C41000 nameplate, current manufacturer instructions and the project drawing before acceptance.
A similar-looking code is not evidence that it will replace LXM52DD12C41000. Compare electrical duty, mounting, connection and control behavior before approving LXM52DD12C41000 for installation.
Installation and service record
Before fitting LXM52DD12C41000, isolate the relevant circuit and identify every conductor or busbar connection. Preserve settings or program data where LXM52DD12C41000 participates in a programmable system. After installation, carry out a controlled functional test appropriate to LXM52DD12C41000 and record the result.
For a repeat order of LXM52DD12C41000, keep the complete suffix, source document revision, equipment tag, accessories and any measured site limits together. This prevents a visually similar variant from being substituted for LXM52DD12C41000 without a technical review.
Related visual-code register
The following 4 unassigned designations have a similar visible LXM5 pattern to LXM52DD12C41000, so they are indexed on this representative page instead of receiving separate product pages. Their ratings and functions may differ from LXM52DD12C41000; verify each full code independently.
Buyer handover checklist
Specify LXM52DD12C41000 in full on the enquiry, not an abbreviated family name. Ask the supplier to confirm the marking and provide the appropriate Schneider Electric documentation for LXM52DD12C41000. Log any deviation from the required LXM52DD12C41000 configuration before dispatch and again at commissioning.
