LX9FH2202 TeSys F contactor coil and its verified selection points
The full designation LX9FH2202 identifies the requested TeSys F contactor coil. This record separates confirmed catalogue information from project-specific checks. The shared Schneider category image is a reference collage, not a photograph of the exact LX9FH2202 variant.
Technical parameters and identity
| Technical item | Verified value / selection note |
|---|---|
| Complete model | LX9FH2202 |
| Product identity | TeSys F contactor coil |
| Component | Specific contactor replacement coil |
| Control voltage | 220 to 230 V AC |
| Frequency | 40 to 400 Hz |
| Consumption | Low-consumption listing |
Interface review
Start the LX9FH2202 review at the interface it connects to: the host assembly, electrical supply, mating device or mechanical opening. Match the host contactor and control supply. Do not infer the missing interface details from a short code or the category image.
For LX9FH2202, record the existing installed marking and the intended location. Compare the full manufacturer's designation, mounting method, terminals, ratings and applicable standards. A visually similar code may differ in an option that changes the installation decision.
Documentation requested with a quotation
Ask the supplier to quote exactly LX9FH2202 and provide the current manufacturer data sheet, installation instructions and any relevant dimensional drawing. State the destination country and quantity. If LX9FH2202 is discontinued or regional, ask for availability and a documented alternative rather than assuming stock.
For a proposed replacement of LX9FH2202, require a written cross-reference. Compare every affected rating and interface with the original engineering requirement before substituting. The presence of another number in the same visual family is not evidence of equivalence.
Installation and commissioning record
Before installing LX9FH2202, check the delivered label, package condition and included accessories against the approved order. Keep a photo of the marking, the wiring or assembly diagram, and the equipment tag. Follow the product instructions for safe isolation and torque or mounting requirements.
After fitting LX9FH2202, document the relevant functional test: operation, indication, protective coordination, communication or mechanical movement as applicable. Record any difference between the planned LX9FH2202 and the actual supplied designation.
Visually similar catalogue codes
No remaining unassigned LX9-pattern designation is grouped with LX9FH2202. Similar appearance alone should never replace a technical comparison.
Buyer decision
Approve LX9FH2202 only after the confirmed parameters above and the project-specific interface checks are reconciled. In particular, identify the supply, protection, mounting and mating accessories that apply to LX9FH2202; not all of these can be inferred from the designation alone.
Keep the final approved LX9FH2202 designation on the procurement and receiving documents. If an alternative arrives, quarantine the change for engineering review before it is installed or energized.
