Practical review of LT4706 TeSys LT47 motor-protection relay
The full designation LT4706 is the procurement key for this Schneider Electric TeSys LT47 motor-protection relay. Use this page to check what is known about LT4706 and what must be confirmed at the installation. Its shared main image illustrates the product category, not the exact LT4706 option.
Key technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Exact order code | LT4706 |
| Device | TeSys LT47 motor-protection relay |
| Straight-through current setting | 0.50–6.0 A |
| Low-current option | Conductor looping through CT holes |
| Output | Normally energized |
Commissioning gate
Confirm the motor current and isolated control power. Confirm this against the installed LT4706 label and the current manufacturer documentation.
Before the order
Write LT4706 exactly as shown on the required equipment record. Review voltage, current, interface, mounting and accessories as applicable; none of these should be inferred solely from the look of LT4706.
Receiving and installation record
When LT4706 arrives, record the packing label and compare it with the permanent product marking. Inspect the terminals, housing and supplied accessories. Quarantine a mismatch instead of assuming that a related code can replace LT4706.
Installation of LT4706 should follow an isolation plan and the current Schneider Electric instructions. Record torque or connector checks, settings, program backups and functional-test results where relevant. The commissioning file should tie every result back to LT4706 and its equipment tag.
Visually related model codes
These 6 remaining designations share a visible LT47 pattern with LT4706; they are listed here rather than published as separate pages. This visual grouping does not establish identical ratings, functions, or interchangeability with LT4706.
Maintenance handover
Keep the exact LT4706 designation with source documentation, equipment tag, acceptance test, and any settings or program archive. At the next maintenance visit, compare the installed LT4706 code with the recorded LT4706 order before replacing or reconfiguring the device.
