Working with LRN07N EasyPact D3N thermal overload relay in an installed system
This page records the full designation LRN07N for procurement and maintenance. The category main image is reused as a reference illustration and may not depict the exact LRN07N unit. Use the technical items below with the current manufacturer documentation and the actual site design.
Technical data at a glance
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | LRN07N |
| Product identity | EasyPact D3N thermal overload relay |
| Product | Thermal overload relay |
| Setting range | 1.6 to 2.5 A |
| Trip class | Class 10A manufacturer declaration |
5. Install and verify
Follow the safe-isolation and installation instructions applicable to LRN07N. Verify wiring, mounting, configuration and protective settings against the project design. Record the functional or commissioning test and the final installed LRN07N identifier.
1. Define the installed duty
Before selecting LRN07N, identify the equipment tag, supply, load and operating conditions. The intended role is EasyPact D3N thermal overload relay. Check contactor pairing and motor full-load current. Record any environmental or safety requirement that will affect the final specification of LRN07N.
2. Check the technical interface
Compare LRN07N against the host equipment, mounting dimensions, terminals and necessary accessories. Check electrical ratings and interface protocols where they apply. A similar-looking code can change a critical attribute, so the full LRN07N designation must remain on the review sheet.
3. Request and assess a quotation
Ask the supplier to quote LRN07N exactly, with quantity, destination and current manufacturer documents. Confirm whether the offer includes every needed accessory. If LRN07N is unavailable, demand a written replacement proposal and review every affected parameter before approving it.
4. Receive and inspect
When LRN07N arrives, compare the nameplate or package label to the approved order. Photograph the marking, inspect physical condition and account for supplied parts. Do not place an item marked differently from LRN07N into service without an approved substitution record.
Why the complete code matters
The confirmed details in the table are deliberately limited to information supported by manufacturer material for LRN07N. Additional values may depend on a suffix, revision, regional approval or mating component. Before ordering or energising LRN07N, verify any unsupplied value in the current exact-product document.
Keep LRN07N visible in the bill of materials, quotation and maintenance log. This reduces the chance that a near-looking part is selected by appearance alone. The shared image on this page does not establish the physical identity or ratings of LRN07N.
Similar-looking designations indexed here
The following 3 codes resemble the LRN pattern of representative LRN07N. They are searchable references only. They may differ in function, ratings, connection or approvals; the list does not mean they can replace LRN07N.
Close-out record
After acceptance, retain the final LRN07N designation, the approved data sheet, supplier details and commissioning result. If the installed part differs from LRN07N, document the engineering approval and update the maintenance record.
