Schneider LP1K0901BD TeSys K miniature contactor: installation and acceptance notes
LP1K0901BD is the complete Schneider Electric reference used here for TeSys K miniature contactor. The shared 330 × 330 category main image is a reference collage, not an exact photograph of every LP1K0901BD option. Read the verified LP1K0901BD data before using the code in a bill of materials.
Technical parameters and identity
| Technical item | Verified value / selection note |
|---|---|
| Complete model | LP1K0901BD |
| Verified identity | TeSys K miniature contactor |
| Main poles | 3 normally open |
| AC-3 current | 9 A at up to 440 V |
| Coil | 24 V DC; 1 NC auxiliary |
Procurement interpretation
Specify LP1K0901BD in full, including the relevant auxiliary parts, configuration and destination equipment tag. Confirm regional availability of LP1K0901BD before committing to a replacement project.
Installation-to-handover sequence
Before ordering: Record the full LP1K0901BD designation, duty, supply and connector requirements.
On receipt: Compare the delivered LP1K0901BD nameplate with the order and inspect its terminals and accessories.
Before energising: Confirm isolation, wiring, settings and the approved LP1K0901BD application drawing.
At handover: Keep the LP1K0901BD functional-test result and configuration record with the equipment file.
Critical fit decision
For LP1K0901BD: Check motor duty and DC coil supply before substituting.
Site interface and commissioning
Before installing LP1K0901BD, compare supply and signal levels, mounting space, environmental conditions and mating components with the approved design. Preserve any existing parameter file or wiring map so that the LP1K0901BD installation can be checked against a baseline.
After fitting LP1K0901BD, test the actual device function in its intended circuit and record any changed setting. A visually similar designation is not evidence of drop-in compatibility with LP1K0901BD; the approved drawing and manufacturer instructions control the decision.
Visible-code family index
The following 8 designations resemble the visible LP1K pattern of LP1K0901BD. They are listed under this representative page rather than receiving separate pages. Differences in contacts, range, supply, construction or approvals must still be checked for each designation.
Acceptance record
Retain the ordered LP1K0901BD code, the delivered label, the selected settings, and a short site-test note. This makes future repeat orders of LP1K0901BD traceable and helps maintenance staff separate LP1K0901BD from close-looking variants.
Additional visually similar model designations
These printed codes resemble LP1K0901BD and are collected here for search only. A different code can specify a different function, rating or accessory. This is not a technical equivalence or interchangeability statement. Verify every full designation before ordering.
- LP1-K0910BD
- LP1SK0600ED
- MP1K0910BD
