Schneider Electric LP1D40008MD specification and handover checklist
LP1D40008MD is the complete Schneider Electric reference used here for TeSys Deca four-pole contactor. The shared 330 × 330 category main image is a reference collage, not an exact photograph of every LP1D40008MD option. Read the verified LP1D40008MD data before using the code in a bill of materials.
Technical parameters and identity
| Technical item | Verified value / selection note |
|---|---|
| Complete model | LP1D40008MD |
| Verified identity | TeSys Deca four-pole contactor |
| Main contacts | 4P, 2 NO + 2 NC |
| AC-1 current | 60 A at up to 440 V |
| Coil | 220 V DC |
Critical fit decision
The practical decision for LP1D40008MD is: Confirm switching category and the existing control voltage. Do not approve LP1D40008MD from a code prefix alone.
Installation-to-handover sequence
Before ordering: Record the full LP1D40008MD designation, duty, supply and connector requirements.
On receipt: Compare the delivered LP1D40008MD nameplate with the order and inspect its terminals and accessories.
Before energising: Confirm isolation, wiring, settings and the approved LP1D40008MD application drawing.
At handover: Keep the LP1D40008MD functional-test result and configuration record with the equipment file.
Site interface and commissioning
Before installing LP1D40008MD, compare supply and signal levels, mounting space, environmental conditions and mating components with the approved design. Preserve any existing parameter file or wiring map so that the LP1D40008MD installation can be checked against a baseline.
After fitting LP1D40008MD, test the actual device function in its intended circuit and record any changed setting. A visually similar designation is not evidence of drop-in compatibility with LP1D40008MD; the approved drawing and manufacturer instructions control the decision.
Visible-code family index
The following 1 designations resemble the visible LP1D pattern of LP1D40008MD. They are listed under this representative page rather than receiving separate pages. Differences in contacts, range, supply, construction or approvals must still be checked for each designation.
Acceptance record
Retain the ordered LP1D40008MD code, the delivered label, the selected settings, and a short site-test note. This makes future repeat orders of LP1D40008MD traceable and helps maintenance staff separate LP1D40008MD from close-looking variants.
