Schneider Electric LE1M35M706 technical overview and inspection notes
Use the exact LE1M35M706 marking when enquiring about this TeSys LE enclosed DOL starter. The category picture is a shared reference image, not a photograph proving the precise LE1M35M706 configuration. The decision points below separate confirmed data from checks that remain site-specific.
Technical data to verify first
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | LE1M35M706 |
| Product identification | TeSys LE enclosed DOL starter |
| Motor overload setting | 0.8–1.2 A |
| Coil | 220/230 V AC class |
| Starter | Direct-on-line enclosed arrangement |
Site decision
Check motor full-load current, coil voltage and enclosure installation. Treat a visually close code as a separate configuration until the manufacturer documentation confirms it.
Receiving inspection
For LE1M35M706, retain the carton label and product-nameplate photo. Compare the ordered LE1M35M706 with the delivered code, included accessories, and the asset record before accepting it for installation.
Installation and handover
The responsible engineer should isolate the equipment and follow the current instructions for LE1M35M706. Record settings, wiring, dimensions, software revision, battery state, calibration or protection-test results as relevant to TeSys LE enclosed DOL starter. A commissioning note should explicitly identify the installed LE1M35M706.
Store the LE1M35M706 data sheet revision, site test report and accessory list with the asset file. This is especially important if a later repair request cites only LE1M35M706 without the complete fitted assembly details.
Similar-looking catalogue codes
The 2 references below resemble the LE1M pattern and are indexed on this representative LE1M35M706 page rather than receiving separate pages. This is a visual search grouping only: their ratings, functions and compatibility may differ from LE1M35M706.
Procurement handoff
Place LE1M35M706 in the request title and repeat LE1M35M706 in the line-item description. Ask the supplier to confirm the exact reference, quantity, documentation and delivery condition. The purchasing record for LE1M35M706 should preserve any approved deviations in writing.
