LC1E0601M5 purchasing and commissioning guide
LC1E0601M5 is the complete Schneider Electric ordering designation for the Easy TeSys Control contactor. The category main image is a shared reference collage, not an exact photograph of LC1E0601M5. The points below separate manufacturer-supported specifications from site-specific choices.
Technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete model | LC1E0601M5 |
| Product identity | Easy TeSys Control contactor |
| Poles | 3P / 3NO |
| AC-3 current | 6 A at up to 440 V |
| Coil / auxiliary | 220 V AC, 50 Hz / 1 NC |
What does LC1E0601M5 identify?
The LC1E0601M5 code identifies the product type and variant described in the table. Keep every character of LC1E0601M5 in purchasing and maintenance records. A partial code or similar photograph cannot establish an exact replacement.
Which application checks matter for LC1E0601M5?
Confirm coil frequency, starter wiring and the application-specific motor duty.
Before releasing LC1E0601M5, compare the installed supply, load, enclosure, terminals, network or mechanical interface as applicable. Match the actual LC1E0601M5 nameplate and panel drawing to the current manufacturer data. Include any required accessory as a separate line item.
How should LC1E0601M5 be installed and tested?
Qualified personnel should isolate the equipment under site procedure, record the original wiring and configuration, then fit LC1E0601M5 according to the relevant instructions. Preserve any software backup or settings associated with LC1E0601M5.
After installation, test the intended operating sequence and record measured values, indications, alarms and the delivered LC1E0601M5 reference. For a protection or safety component, LC1E0601M5 must be validated within the complete application; the part code alone does not prove compliance.
Related-looking codes grouped with this representative
These 64 unassigned codes share the visible LC1E pattern with LC1E0601M5. They are included on this representative page and are not queued as separate product pages. Their technical specifications may differ from LC1E0601M5; check the full code before substitution.
Final procurement note
Confirm the availability and regional lifecycle of LC1E0601M5, the current datasheet revision and the delivered label. Keep the LC1E0601M5 selection decision with the installation record so a later service team can reconstruct why this exact item was ordered.
