LC1D115BD ordering and acceptance record for TeSys Deca power contactor
LC1D115BD is a specific Schneider Electric TeSys Deca power contactor reference. The category collage used as its main picture is a shared reference image, not an exact photo of LC1D115BD. The facts below are tied to the stated code; the actual installation still needs a fit review.
Technical specification
| Technical item | Verified value / selection note |
|---|---|
| Exact designation | LC1D115BD |
| Manufacturer product identity | TeSys Deca power contactor |
| Main contacts | 3 poles, normally open |
| AC-3 current | 115 A at up to 440 V |
| Control coil | 24 V DC |
Purchase and installation matrix
| Technical item | Verified value / selection note |
|---|---|
| Existing installation | Record the installed LC1D115BD code, equipment tag and panel or machine drawing. |
| Electrical or signal match | Compare LC1D115BD voltage, current, signal or safety duty to the application. |
| Mechanical and accessory fit | Check LC1D115BD terminals, mounting, operators, bases and available space. |
| Acceptance evidence | Retain the delivered LC1D115BD label, settings and functional test record. |
The buying decision
Use LC1D115BD only after resolving the essential field condition: Check motor duty and the contactor's auxiliary contacts and terminals. Capture any departure from the installed LC1D115BD arrangement as an engineered change.
Questions for the supplier
Quote the complete LC1D115BD designation, quantity, destination and expected documentation. Ask whether LC1D115BD needs a separate terminal block, protective accessory, operator, network adaptor or configuration license for the proposed installation.
Ask about the current regional lifecycle of LC1D115BD. If an alternative is offered, compare its function, ratings, mounting and wiring against LC1D115BD; do not equate an official replacement recommendation with automatic drop-in interchangeability.
Commissioning and traceability
Qualified personnel should isolate the circuit before handling LC1D115BD, mark as-found wiring, preserve settings where relevant and test the finished installation against the approved design. File the delivered LC1D115BD code, program or parameter changes and acceptance measurements together.
Visually similar codes
The 237 unassigned codes below resemble LC1D115BD by the visible LC1D pattern. They are indexed on this representative page and will not receive separate pages in this batch. They are not asserted to be interchangeable with LC1D115BD; check each complete code.
Release note
Release the order only when LC1D115BD identity, application fit, accessories and availability have been checked. Keep the LC1D115BD technical and acceptance record accessible for future maintenance; a picture or abbreviated code is not sufficient evidence.
