Reviewing KTA0800ET52C Canalis KTA aluminium busway straight length for an installed system
KTA0800ET52C is the exact designation used for this Canalis KTA aluminium busway straight length entry. The picture is a shared Schneider-category reference collage, not an exact photograph of KTA0800ET52C. Use the confirmed details below as the starting point for enquiry; the installed label and current manufacturer document govern final selection.
Technical data and identification
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | KTA0800ET52C |
| Product identity | Canalis KTA aluminium busway straight length |
| Busway current class | 800 A |
| Conductors | 3L+N+PER, aluminium |
| Length listing | Made to measure, 2 to 2.5 m |
Site information to collect
Before ordering KTA0800ET52C, write down the existing equipment tag, location and duty. Confirm the measured run, joint arrangement and conductor scheme before release. Capture a legible photograph of the complete KTA0800ET52C marking so that voltage, option suffix and revision can be compared with the quotation.
Check the mating equipment around KTA0800ET52C: supply and load wiring, mechanical mounting, protection, communications or software interface as appropriate. The table intentionally separates documented facts from values that depend on a complete configured variant. Never infer a missing rating from a shared image or from another model whose code merely resembles KTA0800ET52C.
Quotation worksheet
- Complete KTA0800ET52C designation and quantity
- Condition, revision and applicable manufacturer documentation
- Included accessories, exclusions and delivery region
- Any proposed substitution identified separately for approval
For KTA0800ET52C, ask the supplier to quote the exact reference and disclose any deviation. A suffix, pole count, communications port, certification or terminal style can change the installation even when the front appearance is similar. If the original KTA0800ET52C is obsolete, confirm availability and obtain an engineering-reviewed migration path rather than assuming a current series is a direct swap.
Installation and commissioning record
Keep the isolation and safety procedure for the equipment that uses KTA0800ET52C. Compare delivered markings, package condition and accessories with the approved order. Record hardware and firmware revisions where present; preserve settings and backups before an installed KTA0800ET52C is removed.
The acceptance test for KTA0800ET52C should match its actual duty: switching or trip performance, protective settings, measured values, motion direction, software connection or busway continuity as applicable. Use qualified personnel and the manufacturer's commissioning instructions. A passing visual inspection alone does not prove that KTA0800ET52C is correctly configured.
Similar-looking designations
No additional unassigned KTA-pattern code is indexed with KTA0800ET52C. A different complete designation still requires its own technical check.
Release decision
Approve KTA0800ET52C for procurement only after the exact model, documented product role, site connections and supplier offer agree. Keep KTA0800ET52C on the purchase and receiving records. If a substitute is proposed, document the differences and obtain approval before fitting it.
