K30H004UP ordering record for Harmony K cam changeover switch
The full designation K30H004UP identifies the requested Harmony K cam changeover switch. This record separates confirmed catalogue information from project-specific checks. The shared Schneider category image is a reference collage, not a photograph of the exact K30H004UP variant.
Technical parameters and identity
| Technical item | Verified value / selection note |
|---|---|
| Complete model | K30H004UP |
| Product identity | Harmony K cam changeover switch |
| Poles | 4 |
| Current class | 32 A |
| Index | 30 degrees |
| Front plate | 64 x 64 mm |
Interface review
Start the K30H004UP review at the interface it connects to: the host assembly, electrical supply, mating device or mechanical opening. Verify cam diagram and front-panel dimensions. Do not infer the missing interface details from a short code or the category image.
For K30H004UP, record the existing installed marking and the intended location. Compare the full manufacturer's designation, mounting method, terminals, ratings and applicable standards. A visually similar code may differ in an option that changes the installation decision.
Documentation requested with a quotation
Ask the supplier to quote exactly K30H004UP and provide the current manufacturer data sheet, installation instructions and any relevant dimensional drawing. State the destination country and quantity. If K30H004UP is discontinued or regional, ask for availability and a documented alternative rather than assuming stock.
For a proposed replacement of K30H004UP, require a written cross-reference. Compare every affected rating and interface with the original engineering requirement before substituting. The presence of another number in the same visual family is not evidence of equivalence.
Installation and commissioning record
Before installing K30H004UP, check the delivered label, package condition and included accessories against the approved order. Keep a photo of the marking, the wiring or assembly diagram, and the equipment tag. Follow the product instructions for safe isolation and torque or mounting requirements.
After fitting K30H004UP, document the relevant functional test: operation, indication, protective coordination, communication or mechanical movement as applicable. Record any difference between the planned K30H004UP and the actual supplied designation.
Visually similar catalogue codes
No remaining unassigned K30-pattern designation is grouped with K30H004UP. Similar appearance alone should never replace a technical comparison.
Buyer decision
Approve K30H004UP only after the confirmed parameters above and the project-specific interface checks are reconciled. In particular, identify the supply, protection, mounting and mating accessories that apply to K30H004UP; not all of these can be inferred from the designation alone.
Keep the final approved K30H004UP designation on the procurement and receiving documents. If an alternative arrives, quarantine the change for engineering review before it is installed or energized.
