HMIDT351 HMI display: seven-inch cutout and base-unit pairing
HMIDT351 is a specific Harmony GTU touchscreen display designation. The following brief combines key electrical or mechanical facts with the application checks that decide whether HMIDT351 belongs in an existing installation. The main image is a shared category reference, not an exact photograph of HMIDT351.
Technical parameter sheet
| Technical item | Verified value / selection note |
|---|---|
| Complete code | HMIDT351 |
| Product family | Harmony GTU touchscreen display |
| Display | 7-inch wide colour TFT |
| Resolution | 800 × 480 WVGA |
| Component | Front display module; verify compatible base unit |
Where this reference fits
The screen module does not by itself replace the HMI application or its base box. Check the matching GTU base, cutout and connection interface.
The HMIDT351 nameplate should be cross-checked with the associated panel drawing and current manufacturer instructions. A neighboring HMIDT351 family code may look alike while changing voltage, contacts, enclosure or output type.
Read the entire HMIDT351 label, including suffixes. Record the host equipment and the existing wiring or mechanical interface before accepting stock.
For HMIDT351, compare the verified attributes above with the site's supply, duty and protective scheme. Treat a close-looking variant as a proposal requiring an explicit comparison.
After installing HMIDT351, test the intended response and document settings, status and any alarms. Keep a traceable record of the delivered HMIDT351 reference.
Field service note
Preserve the HMI project, recipes and communication settings, then validate touch, alarms and controller links with the assembled terminal.
Keep the HMIDT351 order record with any accessory list, software backup and functional test report. If HMIDT351 has a regional lifecycle notice or safety advisory, review it for the specific delivered item before use.
Closely named references
These 8 codes resemble HMIDT351 and are covered as related references here rather than separate product pages in this batch. They are not automatically interchangeable with HMIDT351; compare each complete designation.
- HMIDT551
- HMIDT65X
- HMIDT732
- HMIDT75X
- HMIDT952
- HMIDT65XFH
- HMIDT75XFH
- HMIDT642
Before an order is released
The purchase request for HMIDT351 should include the complete HMIDT351 reference, equipment ID, site voltage, mating device and a photograph of the original label. Confirm current documentation and stock status for HMIDT351 before purchase.
